NextGen Aerospace
Aerospace Technology Institute unveils concept for liquid hydrogen-powered aircraft
FlyZero project posits 279-pax midsize jetliner; will publish technology roadmaps for wings, H2 tanks and cryo fuel systems in early 2022.
Read More
EU launches Clean Aviation partnership, targeting 75% of civil fleet replaced for zero emissions by 2050
Clean Aviation carries forward from Clean Sky to develop disruptive new technologies, flight demonstrated by 2029 for aircraft into service by 2035 and aviation climate neutrality by 2050.
Read More
Embraer unveils four Energia concept aircraft for net-zero aviation by 2050
Aircraft being developed span 9 to 50 seats and electric, hydrogen fuel cell, dual-fuel gas turbine and hybrid-electric propulsion.
Watch
Designing for automated composites manufacturing of low-volume aerostructures
The commercial aerospace industry is heavily focused on design for efficient high-rate manufacturing, but there is still need for automated, affordable fabrication of low-rate aerostructures.
Read More
SAM|XL develops closed-loop manufacturing for composites
Collaborative R&D center at TU Delft develops sensor- and robot-based automation for Composites 4.0 manufacturing, including STUNNING project for welded assembly of a thermoplastic composite fuselage demonstrator.
Watch
Airbus X-Wing will test flapping wing tips, multifunctional trailing edges for future aircraft
Demonstrator will test 30%-scale version of 52-meter composite wing with electrically-powered actuating hinged wing tip for improved efficiency and decarbonization in flight.
Watch
Airbus begins assembly of first Wing of Tomorrow prototype
The program brings together more than 100 new technologies and composites innovations, including delivery of the first fixed trailing edge by GKN Aerospace.
Read More
Spirit AeroSystems Europe delivers first set of A320 Family RTM spoilers
Redesigned spoilers developed via a highly automated advanced manufacturing, out-of-autoclave (OOA) process pioneered by Spirit.
Read More
Composite-metal joining, braided preforms enable next-generation aircraft design
Collins Aerospace invests in new joining, preforming and infusion techniques to target aircraft design needs for reduced weight and lower-cost manufacture.
Watch
Robotic computed tomography – removing NDT barriers for composites
Radalytica uses collaborative robots, ultra-sensitive X-ray photon detectors and the ability to combine CT with ultrasound, surface profiling and other inspection methods to optimize composites part quality, production and reduce cost.
Watch
