HyPoint partners with GTL to extend zero-emission flight with ultralight liquid hydrogen tanks
NASA award-winning fuel cell pioneer works with carbon fiber tank maker GTL to offer up to 10 times more capacity versus existing hydrogen storage tanks.
This BHL Cryotank measures 2.4 meters long x 1.2 meters diameter and weighs 12 kilograms. With a skirt and vacuum dewar shell, the total system weighs 67 kilograms but can hold >150 kilograms of liquid hydrogen, giving it a storage ratio of at least 50%, which is as much as 10 times greater than current state-of-the-art composite hydrogen storage tanks. Photo Credit: GTL, HyPoint
HyPoint (Menlo Park, Calif., U.S.) is developing zero carbon-emission hydrogen (H2) fuel cell systems for aviation and urban/advanced air mobility (UAM/AAM). It is already supplying hydrogen aviation leaders ZeroAvia (Hollister, Calif., U.S.) and Piasecki Aircraft (Essington, Pa., U.S.). HyPoint has announced a partnership with Gloyer-Taylor Laboratories (GTL, Tullahoma, Tennessee, U.S.), an aerospace engineering R&D company, which has developed BHL Cryotank carbon fiber composite liquid hydrogen (LH2) fuel tanks that have demonstrated a 75% mass reduction compared to existing state-of-the-art aerospace cryotanks (metal or composite).
HyPoint will integrate BHL Cryotank H2 storage with its turbo air-cooled fuel cell system, enabling H2-powered aircraft and eVTOL manufacturers to store as much as 10 times more LH2 fuel without adding mass. As a result, aircraft can travel longer distances without refueling. HyPoint also announced that former GE Aviation and Rolls-Royce engineering executive, Umeed Ashtiani, has joined the company to lead its system engineering team and oversee the implementation of the tank technology.
“GTL offers a liquid hydrogen tank that is stronger and lighter than anything else on the market”
"Reducing weight is the most important factor for enabling longer-distance air travel with fewer stops to refuel," said Dr. Alex Ivanenko, founder and CEO of HyPoint. "Our hydrogen fuel cell system offers better specific power performance compared with any alternative available today, opening the door to short-haul zero-emission hydrogen flight and urban air mobility. This partnership with GTL goes even further by offering aircraft and eVTOL makers a liquid hydrogen tank that is stronger and lighter than anything else on the market, thereby significantly increasing fuel capacity. By utilizing this new fuel tank technology, longer-haul aircraft may be able to utilize hydrogen for the first time while eVTOL makers can effectively multiply their flight range and operational time. We're excited to be working with GTL to offer superior alternative power sources and accelerate the adoption of zero-emission hydrogen across the aviation industry."
GTL’s composite tank advantage
GTL specializes in developing advanced composite prototypes and technologies for aerospace and has won numerous development contracts with NASA, Defense Advanced Research Projects Agency (DARPA), the U.S. Air Force, and others. GTL incorporates many polymer-composite manufacturing processes, including filament winding, hand layup, and fiber placement to produce composite components. GTL has fabricated and tested multiple BHL Cryotank models at a range of scales that have been demonstrated to be leak-tight even after repeated cryo-thermal pressure cycles. This technology has achieved TRL 5+ and is compatible with a variety of cryogenic propellants including liquid oxygen, liquid methane and LH2.
Weighing 67 kilograms and storing 150 kilograms of H2 gives a storage ratio of 50% — up to 10 times greater than state-of-the-art H2 storage tanks.
The pictured BHL Cryotank (held by Zachary Taylor, Vice President ofH2 Engineering at GTL) measures 2.4 meters long with a 1.2 meter diameter and weighs 12 kilograms (roughly 26 pounds). When a skirt and vacuum dewar shell are added, the total system weight is 67 kilograms. This particular tank system can hold more than 150 kilograms of LH2, giving it a storage ratio (the weight of stored H2 fuel relative to total system weight) of at least 50% — up to 10 times greater than current state-of-the-art H2 storage tanks. An aircraft equipped with GTL dewar tank technology could achieve as much as four times the range of a conventional aircraft using aviation fuel, cutting aircraft operating costs by an estimated 50% on a dollar-per-passenger-mile basis.
"Based on our internal analysis of a De Havilland Canada Dash 8 Q300, which seats 50 to 56 passengers, the standard PW123B engine would typically support a range of 1,558 kilometers,” said Sergei Shubenkov, co-founder and head of R&D at HyPoint. “By implementing HyPoint's system and a standard liquid hydrogen tank, the same aircraft could achieve five hours of flight time or a max range of 2,640 kilometers. With GTL's tank, it could fly for 8.5 hours or a max range of 4,488 kilometers, indicating that this aircraft could fly three times further with zero emissions by using HyPoint and GTL compared with conventional aviation fuel," "That's the difference between this plane going from New York to Chicago with high carbon emissions versus New York to San Francisco with zero carbon emissions."
With BHL Cryotanks, large aircraft will be able to use H2 fuel for cross-country flights at least a decade earlier than expected.
"Similar to the carbon fiber that is used in racing bikes, our carbon-composite technology adds strength and durability while significantly reducing weight,” said Paul Gloyer, President and CEO at GTL. “With BHL Cryotanks, larger aircraft such as jumbo jets will be able to utilize hydrogen fuel for cross-country flights at least a decade earlier than expected. Similarly, eVTOL and drone makers can significantly extend their range and/or flight time, opening new markets and opportunities. HyPoint is pioneering hydrogen fuel cell technology and we are excited to be working toward a shared vision for zero-emission hydrogen aviation."
Related Content
Drag-based wind turbine design for higher energy capture
Claiming significantly higher power generation capacity than traditional blades, Xenecore aims to scale up its current monocoque, fan-shaped wind blades, made via compression molded carbon fiber/epoxy with I-beam ribs and microsphere structural foam.
Read MoreKite-based energy system aims for high-output, low-impact wind energy
Netherlands-based startup Kitepower’s Falcon airborne wind energy (AWE) system deploys a fiberglass-intensive kite to generate wind energy with a low ground footprint.
Read MoreNovel composite technology replaces welded joints in tubular structures
The Tree Composites TC-joint replaces traditional welding in jacket foundations for offshore wind turbine generator applications, advancing the world’s quest for fast, sustainable energy deployment.
Read MoreComposites end markets: Pressure vessels (2024)
The market for pressure vessels used to store zero-emission fuels is rapidly growing, with ongoing developments and commercialization of Type 3, 4 and 5 tanks.
Read MoreRead Next
Combining multifunctional thermoplastic composites, additive manufacturing for next-gen airframe structures
The DOMMINIO project combines AFP with 3D printed gyroid cores, embedded SHM sensors and smart materials for induction-driven disassembly of parts at end of life.
Read MoreThe next-generation single-aisle: Implications for the composites industry
While the world continues to wait for new single-aisle program announcements from Airbus and Boeing, it’s clear composites will play a role in their fabrication. But in what ways, and what capacity?
Read More“Structured air” TPS safeguards composite structures
Powered by an 85% air/15% pure polyimide aerogel, Blueshift’s novel material system protects structures during transient thermal events from -200°C to beyond 2400°C for rockets, battery boxes and more.
Read More