Advanced nonwovens for composites from TFP

Connecting the composites industry

All Topics See All

Additive Manufacturing

Adhesives

Advanced Air Mobility

Aerospace

Application

ATL/AFP

Autoclave

Automation

Automotive

Biomaterials

BMI

Bonding/Welding

Braiding

CAMX

Carbon Fibers

Ceramic Matrix Composites

Coatings

Composites 4.0

Composites Basics

Compression Molding

Construction

Consumer

Core

Curing

Cutting/Kitting

CW Top Shops

CW Trending

Cyanate Ester

Defense

Design & Tooling

Design and Testing

Design/Simulation

Digital Demos

Digitization

Economics

Editorial

Electric Vehicles

Electronics

Epoxies

Fabrics/Preforms

Fastening / Finishing

Feature

Filament Winding

Focus on Design

FRP Rebar

Glass Fibers

Hi-Temp Resins

Hydrogen Storage

IACMI

Infrastructure

Infusion

Injection/Overmolding

Inside Manufacturing

JEC

Job Postings

Ketones

Lifecycle Analysis

Machining/Drilling

Marine

Market Outlook

Markets

Mass Transit

Materials

Materials Testing

Medical

Molds/Tools

Nanomaterials

Natural Fibers

NDI

Out of Autoclave

Past, Present and Future

Perspectives and Provocations

Plant Tours

Predicting Failure

Prepregs

Pressure Vessels

Processes

Pultrusion

Recycling

Reinforcements

Repair

Resins

RTM

Sensors

Sheet Molding Compound

SHM

Sustainability

Thermoplastics

Trends

Troubleshooter

Weaving

Wind/Energy

Work In Progress

Workforce Development
Markets See All

16 May 2024 Aerospace
GTL validates LH2 composite dewar tanks for use in aviation
Test results exceeded expectations regarding holding hard vacuum, heat load, rapid chill-down and hydrogen fraction goal, leading to flight prototype fabrication.

13 May 2024 Advanced Air Mobility
Archer completes installation of high-volume battery pack manufacturing line
“Automotive-style” line has the capability of producing up to 15,000 battery packs — complete with composite enclosures and cylindrical cells — per year to keep up with eVTOL aircraft production goals.

10 May 2024 Pressure Vessels
Luxfer Gas Cylinders awarded grant for 700-bar Type 4 tank development
Alberta Innovates initiative selected 20 applicants, including Luxfer, to advance hydrogen production, storage, transmission, distribution and use.

8 May 2024 Advanced Air Mobility
NIAR adds flight test facility for eVTOL aircraft testing
In addition to providing a controlled environment for conducting restrained eVTOL aircraft operation, NIAR provides material development and other testing options.

7 May 2024 Wind/Energy
Hexagon Purus reports all-time high quarterly revenue, up 67% over Q1 2023
Type 4 CFRP cylinder manufacturer continues ramp-up, with H2 infrastructure up 38% and H2 mobility up 213% year over year while momentum continues in aerospace applications.

29 Apr 2024 Pressure Vessels
Hexagon Ragasco launches Linktra Smart cylinders in Norway
Fiberglass pressure vessels with IoT provide real-time insight into refilling needs for LPG consumers.
Design & Tooling See All

13 May 2024 Design/Simulation
Anaglyph releases Laminate Tools version 5.2
Nesting, design, GUI and viewing features have been improved or added to the composites design software tool.

10 May 2024 Pressure Vessels
TPI, UMaine, ORNL to leverage world’s largest polymer 3D printer for wind turbine tooling
Ingersoll Masterprint LFAM printer will be used to produce and demonstrate 100% recyclable tooling that could cut large composite blade development cycles and tooling costs by as much as 50%.

2 May 2024 Aerospace
NCC leads composites manufacturing phase of eXtra wing demonstrator
Key structural elements for a 6-meter section of the Airbus biomimetic wing were undertaken by NCC engineering specialists to produce 28 one-off flying parts.

12 Apr 2024 Automation
Optimizing robotic winding of composite tanks and pipes
Pioneer in mandrel-based reinforced rubber and composite products, TANIQ offers TaniqWindPro software and robotic winding expertise for composite pressure vessels and more.

12 Apr 2024 Molds/Tools
Century Tool investment boosts efficiency, capability in tooling for composites
Designer and builder of compression molds for composite structures installs seven-axis CNC deep-hole drilling and milling machine to improve productivity.

6 Mar 2024 Molds/Tools
Massivit, Sika to co-brand digital tooling materials for Massivit 10000 series
Strategic MOU initially introduces SikaBiresin CIM 120 and SikaBiresin CIM 80 to serve crucial composites market needs for 3D printing tooling, prototyping and more.
Materials See All

16 May 2024 Core
Airbus video highlights RACER compound helicopter first flight
Launched as part of a Clean Sky 2 program, a compound design — rotor, split fixed-wing, propulsive propellers — uses composites to cut fuel consumption and emissions by 20%.

16 May 2024 Recycling
11th Hour Racing sponsors IMOCA to advance competitive sailing diversity, sustainability
Additional support will be provided for IMOCA projects related to building with alternative material sources, a carbon fiber recycling pilot project, increasing opportunities for female sailors and more.

15 May 2024 Repair
Composite wrap system combats corrosion in industrial tank repair
A fiberglass and carbon fiber composite wrap system enabled an Australian nickel mine to quickly repair a stainless steel ammonium sulphate feed tank and protect against future corrosion.

14 May 2024 Natural Fibers
Toyoda Gosei develops seawater-derived fiber-reinforced material
Fiber reinforcement is formed from magnesium hydroxide derived from seawater, achieving plastic parts that contributed to improved environmental performance.

14 May 2024 Natural Fibers
BioStruct project to validate biocomposite-focused manufacturing processes
For the next 3 years, Ideko and European partners are working to develop and validate to TLR 7 novel processes to boost the use of natural fibers and biological resins.

10 May 2024 Carbon Fibers
JCB Aero aircraft interior flooring panels incorporate SHD composites
High-performance carbon fiber prepreg using SHD’s FRVC411 epoxy resin system resulted in a durable, compliant design for the MRO market.
Processes See All

16 May 2024 Aerospace
Airbus video highlights RACER compound helicopter first flight
Launched as part of a Clean Sky 2 program, a compound design — rotor, split fixed-wing, propulsive propellers — uses composites to cut fuel consumption and emissions by 20%.

9 May 2024 Additive Manufacturing
CEAD, AES kick off U.S. symposium highlighting LFAM ecosystem
CEAD Flexbot print cell demonstrations and industry presentations showcased the emerging options in 3D printing for polymers, composites and more at AES’ Akron facility.

8 May 2024 Aerospace
Aitiip concludes HELACS project with waterjet cutting demonstration
Novel platform involving digital twin and human-robot collaboration succeeded in cutting a component from the 19th section of an A350 wing, highlighting its ability to enable composite structure recycling.

7 May 2024 Bonding/Welding
MFFD longitudinal seams welded, world's largest CFRTP fuselage successfully completed
Fraunhofer IFAM and partners have completed left and right welds connecting the upper and lower fuselage halves and sent the 8×4-meter full-scale section to ZAL for integration with a cabin crown module and testing.

6 May 2024 Glass Fibers
Large-volume VFGF extrusion printer facilitates modular composite cockpit
Queen 1 system from Q.Big 3D produced complete cockpit assembly of a full flight simulator in a little more than a month, enabling fast build speeds, high surface quality and dimensional accuracy.

29 Apr 2024 Composites 4.0
Com&Sens presents workshop on fiber optic sensing for COPVs
Three-day hands-on workshop from June 11-13 in Leuven, Belgium, will equip participants with a better understanding of fiber optic sensing technology for digital manufacturing of composite tanks.
Composites 101 See All

20 Feb 2024 Consumer
Composites end markets: Electronics (2024)
Increasingly, prototype and production-ready smart devices featuring thermoplastic composite cases and other components provide lightweight, optimized sustainable alternatives to metal.

25 Aug 2023 Composites Basics
Celebrating 30 years of CompositesWorld, Part 1
CW explores key composite developments that have shaped how we see and think about the industry today.

21 Jul 2023 Design/Simulation
The basics of composite drawing interpretation
Knowing the fundamentals for reading drawings — including master ply tables, ply definition diagrams and more — lays a foundation for proper composite design evaluation.

27 Jan 2023 Molds/Tools
Proper application of semi-permanent mold release systems
Performing regular maintenance of the layup tool for successful sealing and release is required to reduce the risk of part adherence.

9 Jan 2023 Feature
Composites end markets: Aerospace (2023)
With COVID in the past and passengers flying again, commercial aircraft production is ramping up. The aerocomposites supply chain is busy developing new M&P for an approaching next-generation aircraft program.

29 Dec 2022 Market Outlook
Composites end markets: Automotive (2023)
Electrification and a focus on sustainability lead to opportunities and innovations in composites, from battery enclosures to structural components and more.
- Webinars
- Events
- Suppliers
- Whitepapers
Webinars See All

12 Jun 2024
Introduction of Automotive-Matured Surface Technologies and High-Rate Thermoplastic Aerospace Applications at NIAR
KraussMaffei will explain in-situ polyurethane (PUR) overmolding of injection-molded and composite parts and the development of this technology over the last decade. Waruna Seneviratne, director of the Advanced Technologies Lab for Aerospace Systems (ATLAS), will discuss how aerospace and advanced air mobility (AAM) markets can capitalize on this high-rate manufacturing solution. Agenda: What is ColorForm: process, equipment and tooling Pros and cons of the technology High technology solution examples: ColorForm automotive Market references in automotive Demand for future commercial aviation and both AAM and urban air mobility (UAM) What aerospace can learn from automotive for addressing demand for high-rate manufacturing Technological advances enabling material and process improvements for the future Role of ATLAS manufacturing innovation center for promoting advanced manufacturing and workforce development Road map for certification through manufacturing demonstrations

18 Jun 2024
Advances in Aerospace: Building the Case for Thermoplastics
Thermoplastic material systems have been used in aerospace for decades. Their use and adoption continues to grow and Trelleborg has been on the leading edge of development for many of these systems. In this webinar, Trelleborg will be presenting a range of topics from the use of in-situ, automated fiber placement of thermoplastics prepreg for structural and functional products to complex injection molding of thermoplastic interior pieces. It will explore some of the benefits these products provide and the potential for future growth and development. Agenda: Current state of thermoplastics in aerospace Thermoplastic composite use cases for high-performance electric motors and torque tubes Injection-molded thermoplastic interior pieces The future of potential for thermoplastic applications for aerospace

25 Jun 2024
Digital Solutions for Enhanced Productivity in Composites Engineering
Explore next-gen composites engineering solutions in this webinar. Uncover the capabilities of Fives' Composite Optical Automated Surface Tracking (COAST) platform and Advanced Composites Environment Suite (ACES) software, optimizing design, production and quality control. Gain insights into how these end-to-end solutions enhance productivity and deliver measurable results. Join Fives to discover the transformative benefits of a fully-integrated digital solution for revolutionizing manufacturing processes. Agenda: Digital suite: CAD, CAM, robotic automated fiber placement (RAFP) and COAST Video demonstration Value propositions: maintenance and root cause analysis Product offerings (price, etc.) Customer use case

On Demand
Beyond Kinetic Models: Innovative Pathways to Boost Production Efficiency
After having established a strong foundation in kinetic models in a previous webinar, part two delves into the exciting realm of machine learning and its transformative potential for composite manufacturing. While kinetic models have served the industry well, the growing complexity of composite manufacturing demands more sophisticated approaches. In this session, sensXPERT will explore innovative pathways to supercharge your production efficiency and enhance sustainability beyond the limits of traditional models. See how machine learning empowers composite manufacturers to achieve unprecedented accuracy in predicting key production parameters such as temperature, pressure and cure time. This translates to reduced cycle times and waste while increasing production throughput to maximize efficiency. SensXPERT will provide concrete examples and case studies demonstrating how to bridge the gap between meticulously-controlled laboratory experiments and the realities of the production floor, overcoming the limitations of kinetic models. Agenda: Define machine learning, its applications and their impact on composite manufacturing Explore real-world case studies in diverse composites manufacturing applications and how they exploit integration options Correlation analysis: uncovering hidden relationships between process parameters and product outcomes Time series analysis: forecasting production trends Anomaly detection: identifying irregularities

On Demand
Honeycomb for Aerospace Structures
This webinar will cover a range of honeycomb products, how to best select the right honeycomb for particular applications and design guidelines for honeycomb-cored structures. Agenda: Honeycomb overview Configuration and applications General considerations and quality standards Methods and methodology for shaping core Core forming Stabilization CNC machining Case studies Cost progression

On Demand
The Keys to High-Performance Composites: Semi-Finished Goods
As part three of the webinar series about composites manufacturing processes, this webinar will focus on the two main processes to manufacture semi-finished goods and the composites resulting from it: sheet molding compounding (SMC) and prepreg technology. This presentation will briefly highlight the advantages and challenges. The main part of the webinars will showcase product recommendations from Evonik's portfolio and how they can be used to enhance the performance of the final composite materials to meet the requirements from the automotive, aerospace and sporting goods industries.

6 Jun 2024 New & Upcoming
Redefining Laser Projection in Composites Manufacturing Register Now
Events See All

5 Jun 2024
ILA Berlin
ILA Berlin brings the world's aerospace industry to the center of Europe every two years - next time from June 5 to 9, 2024.

11 Jun 2024
JEC Forum Southeast Asia
The JEC Forum Southeast Asia is an event organised by JEC The JEC Forum Southeast Asia is organised on June 11 and 12, 2024, by JEC, in partnership with the Thai Composites Association (TCA), bringing together the composite materials community in Southeast Asia.

19 Jun 2024
SAMPE China

25 Jun 2024
Graphene Conference 2024
The 14th edition of the Graphene Conference will take place June 25-28, 2024, in Madrid, Spain. The international gathering includes thematic workshops, B2B networking and an Industrial Forum that dives into a variety of topics, including the latest developments in graphene production methods towards wide scale commercialization and examples of graphene in electronics, energy storage, aerospace and barrier applications.

17 Jul 2024
PU China/UTECH Asia

4 Sep 2024
International Composites Summit 2024
The International Composites Summit (ICS) is renowned as the only solely focused UK event for professionals involved in the composites industry. ICS promises to be a unique platform for knowledge sharing, networking, and exploring the latest advancements in composite materials internationally, bringing people together to do business.

20 May 2024 New & Upcoming
SAMPE 2024 Register Now
Suppliers See All

Auxiliary processing equipment, repair equipment, and supplies

Composite Structures & Components

Design, testing, consulting, other services

Fabricating Services

Fiber converting/prepreg manufacturing equipment

Materials

Primary manufacturing equipment

Testing, gauging, monitoring, analytical equipment and software

Tool Types

Tools/tooling materials

Get Listed!
Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.
Request Your Free Listing
Whitepapers See All

10 Jan 2024
Jetcam addresses the economic importance of efficient material nesting
Jetcam’s latest white paper explores the critical aspects of nesting in composites manufacturing, and strategies to balance material efficiency and kitting speed.

8 Jan 2024
Arris Composites demonstrates advantages of natural fibers applied with Additive Molding
Arris presents mechanical testing results of an Arris-designed natural fiber thermoplastic composite in comparison to similarly produced glass and carbon fiber-based materials.

27 Dec 2023
Cevotec white paper presents novel approach for H2 tank production
Cevotec, a tank manufacturer, Roth Composite Machinery and Cikoni, have undertaken a comprehensive project to explore and demonstrate the impact of dome reinforcements using FPP technology for composite tanks.

23 Nov 2023
KCARBON and KIST develop lyocell/PLA/wood biocomposites
Initial demonstration in furniture shows properties two to nine times higher than plywood, OOA molding for uniquely shaped components.

1 Nov 2023
Exel Composites releases guide for design considerations in composite tubes
The composite tubes white paper explores some of the considerations for specifying composite tubes, such as mechanical properties, maintenance requirements and more.

21 Jul 2023
UAMMI white paper addresses composites recycling in Utah
Foundational research discusses the current carbon fiber recycling landscape in Utah, and evaluates potential strategies and policies that could enhance this sustainable practice in the region.
Articles See All

15 May 2024 Repair
Composite wrap system combats corrosion in industrial tank repair
A fiberglass and carbon fiber composite wrap system enabled an Australian nickel mine to quickly repair a stainless steel ammonium sulphate feed tank and protect against future corrosion.

13 May 2024 Economics
GBI activity knocks at the door of expansion in April
While the Composites Fabricating index still contracted in April, it continues to close in on a reading of 50, which indicates expansion.

1 May 2024 Editorial
Looking at composites through the lens of U.S. history
When you’re a tourist with a background in writing for manufacturing it’s impossible not to notice all of the ways in which composites have resulted in significant milestones in the U.S. — historically and in the present.

26 Apr 2024 RTM
Designing an infused, two-piece composite baseball bat
With its Icon BBCOR bat, Rawlings leveraged its experience in braided fabrics and RTM to create an optimized, higher-performance two-piece design.

24 Apr 2024 RTM
From the CW Archives: The life and death of the BMW i3
A look back at the ambitious and impressive composites production system BMW developed for production of the all-electric i3 EV.

24 Apr 2024 Carbon Fibers
Aviation-specific battery system uses advanced composites to address electric, hybrid flight
BOLDair’s composite enclosure, compression structures and thermal runaway management enables high-performance electric energy storage.

17 May 2024 Automation
How AI is improving composites operations and factory sustainability
Sustainability See All

19 Apr 2024 Aerospace
JEC World 2024 highlights: Forwarding initiatives surrounding sustainability and mobility
Themes at the forefront of JEC World 2024 included solutions for mobility applications and sustainable materials, technologies and processes for composites manufacturing.

9 Apr 2024 Recycling
JEC World 2024 highlights: Glass fiber recycling, biocomposites and more
CW technical editor Hannah Mason discusses trends seen at this year’s JEC World trade show, including sustainability-focused technologies and commitments, the Paris Olympics amongst other topics.

28 Mar 2024 Automotive
Forvia moves toward more sustainable automotive composites manufacturing
Automotive technology supplier Forvia shares sustainability goals and recent developments aimed at bio-based and recycled materials and ramping up hydrogen tank production for clean mobility.

27 Mar 2024 Sustainability
4 things to consider for sustainable composites manufacturing
Customer decarbonization goals demand supply chains with sustainable business practices. Here are four considerations for supporting those goals discussed at CW Tech Days: Sustainability.

25 Mar 2024 Sustainability
Measuring energy use to enable sustainable composites production
Airbus subsidiary CTC uses new technology to measure energy use in machine components and processes to optimize equipment, production lines and guide decisions for future composites.

20 Mar 2024 Sustainability
Novel DITF composite material enables CO2-negative construction
Three materials — bio-based carbon fibers, natural stone and biochar — act as an alternative to reinforced concrete in a house wall demonstrator in the DACCUS-Pre project.

28 Apr 2024 Sustainability
Watch: A practical view of sustainability in composites product development
Knowledge Centers

Closed Molding Knowledge Center
Closed mold processes offer many advantages over open molding. This knowledge center details the basics of closed mold methods and the products and tools essential to producing a part correctly.

Sustainability
The composites industry is increasingly recognizing the imperative of sustainability in its operations. As demand for lightweight and durable materials rises across various sectors, such as automotive, aerospace, and construction, there is a growing awareness of the environmental impact associated with traditional composite manufacturing processes.

Automated Composites
In the Automated Composites Knowledge Center, CGTech brings you vital information about all things automated composites.

CompositesWorld Collections
CW’s editors are tracking the latest trends and developments in tooling, from the basics to new developments. This collection, presented by Composites One, features four recent CW stories that detail a range of tooling technologies, processes and materials.

The Now and Next in Composites

Sensors for Composite Processing
CW Tech Days

Composites in Infrastructure and Construction
CompositesWorld’s CW Tech Days: Infrastructure event offers a series of expert presentations on composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in Advanced Air Mobility
Explore the cutting-edge composites industry, as experts delve into the materials, tooling, and manufacturing hurdles of meeting the demands of the promising advanced air mobility (AAM) market. Join us at CW Tech Days to unlock the future of efficient composites fabrication operations.

Thermoplastics for Large Structures
Thermoplastics for Large Structures, experts explored the materials and processing technologies that are enabling the transition to large-part manufacturing.

Sustainability in Composites Manufacturing
Explore the technologies, materials, and strategies that can help composites manufacturers become more sustainable.
Collections See All

Composites in Hydrogen Storage
A report on the demand for hydrogen as an energy source and the role composites might play in the transport and storage of hydrogen.

Recycled Composites
This collection features detail the current state of the industry and recent success stories across aerospace, automotive and rail applications.

Thermoplastic Composites
This collection details the basics, challenges, and future of thermoplastic composites technology, with particular emphasis on their use for commercial aerospace primary structures.

Tooling
This collection features recent CW stories that detail a range of tooling technologies, processes and materials.

CAMX 2024

September 09 - 12, 2024

CAMX is your best source for new solutions, technologies, and ideas you need for your current and future projects. CAMX makes it easy to watch live process demos, see materials and interactive displays on what may be possible in the future, and meet with hundreds of manufacturers, distributors, and suppliers.

thecamx.org/

San Diego, CA

Coatings for Carbon Fiber from Keyland Polymer

Advanced Nonwovens for Aerocomposites - TFP