Aerospace
JCB Aero aircraft interior flooring panels incorporate SHD composites
High-performance carbon fiber prepreg using SHD’s FRVC411 epoxy resin system resulted in a durable, compliant design for the MRO market.
Read More
New CMC turbine vanes successfully tested in wind tunnel
SiC/SiC ceramic matrix composite (CMC) inlet guide vanes for a high-pressure turbine are aimed for a geared turbofan and show promise for more efficient aeroengines with less weight and need for cooling.
Read More
Syensqo introduces AeroPaste 1003 aerospace adhesive
Two-part room-temperature paste increases high-rate assembly and joining efficiencies when bonding metallic and composite parts.
Read More
Cryomotive prepares CcH2 storage for demonstration on heavy-duty trucks
Cryogas system is based on carbon fiber towpreg wrapped Type 3 inner tank at 400 bar storing 38 kilograms of CcH2.
Read More
Aitiip concludes HELACS project with waterjet cutting demonstration
Novel platform involving digital twin and human-robot collaboration succeeded in cutting a component from the 19th section of an A350 wing, highlighting its ability to enable composite structure recycling.
Read More
Mejzlik Propellers is the main propeller supplier for Dufour Aero2
Carbon fiber fixed-pitch propeller blades are customized for the drone’s lift and cruise requirements, adds to the aircraft’s already extensive composites use.
Read More
MFFD longitudinal seams welded, world's largest CFRTP fuselage successfully completed
Fraunhofer IFAM and partners have completed left and right welds connecting the upper and lower fuselage halves and sent the 8×4-meter full-scale section to ZAL for integration with a cabin crown module and testing.
Read More
ÉireComposites signs extended contract for Spirit aerostructure programs
Under the multi-million euro deal, the Irish company will supply composite parts for Bombardier and Airbus aircraft until 2030.
Read More
Eviation completes conceptual design review of Alice aircraft
The all-electric company moves closer to commercialization, confirming an aircraft configuration that is both certifiable and can streamline manufacturing.
Read More
NCC leads composites manufacturing phase of eXtra wing demonstrator
Key structural elements for a 6-meter section of the Airbus biomimetic wing were undertaken by NCC engineering specialists to produce 28 one-off flying parts.
Read More
