SAMPE Europe 2011 at a Glance
A quick look at the SAMPE Europe Conference schedule.
Monday, March 28
Registration 8:00 a.m. to 4:30 p.m.
Opening and Keynote Address #1: Aerospace 9:00 a.m. to 10:00 a.m.
Introduction: Bruno Beral,
SAMPE Europe president
Speaker: Dr. Takashi Ishkawa,
Japan Aerospace Exploration Agency
(JAXA, Tokyo, Japan)
Coffee Break 10:00 a.m. to 10:30 a.m.
Session 1 10:35 a.m. to 12:30 p.m.
Plenary Session: MAAXIMUS European simulation-based design initiative
Lunch 12:35 p.m. to 1:30 p.m.
Session 2 1:35 p.m. to 3:30 p.m.
2A: Out-of-Autoclave
2B: Thermoplastics
Coffee Break 3:35 p.m. to 4:00 p.m.
Session 3 4:00 p.m. to 6:00 p.m.
3A: RTM/Infusion
3B: Design
SAMPE Europe Conference Dinner
8:00 p.m. to 11:00 p.m.
Tuesday, March 29
Registration 8:00 a.m. to 4:30 p.m.
Keynote #2: Automotive 9:00 a.m. to 10:00 a.m.
Speaker: Dr. John Anders Manson,
École Polytechnique Fédérale de Lausanne (EPFL, Lausanne, Switzerand)
Coffee Break 10:35 a.m. to 11:00 a.m.
Session 4 10:30 a.m. to 12:30 p.m.
Plenary Session: Automotive
Lunch 12:35 p.m. to 1:30 p.m.
Session 5 1:35 p.m. to 3:30 p.m.
5A: Sandwich
5B: New Materials
Coffee Break 3:35 p.m. to 4:00 p.m.
Session 6 4:05 p.m. to 6:00 p.m.
6A: Joining
6B: Textile Structures
Closure of SEICO 11 6:05 p.m. to 6:15 p.m.
Bruno Beral, SAMPE Europe president
Related Content
-
From the CW Archives: Airbus A400M cargo door
The inaugural CW From the Archives revisits Sara Black’s 2007 story on out-of-autoclave infusion used to fabricate the massive composite upper cargo door for the Airbus A400M military airlifter.
-
Novel dry tape for liquid molded composites
MTorres seeks to enable next-gen aircraft and open new markets for composites with low-cost, high-permeability tapes and versatile, high-speed production lines.
-
One-piece, one-shot, 17-meter wing spar for high-rate aircraft manufacture
GKN Aerospace has spent the last five years developing materials strategies and resin transfer molding (RTM) for an aircraft trailing edge wing spar for the Airbus Wing of Tomorrow program.