Thermoplastic composite B-pillar?
The University of Delaware-Center for Composite Materials worked with several partners, including BMW, to develop a carbon fiber/thermoplastic composite automotive B-pillar that meets structural and crash safety requirements. Next stop, production?
The University of Delaware-Center for Composite Materials (UD-CCM) worked with the National Center for Manufacturing Sciences, the National Highway Transportation Safety Administration and BMW to provide the viability of a thermoplastic composite automotive B-pillar.
The University of Delaware-Center for Composite Materials (UD-CCM, Newark, DE, US), in partnership with the National Center for Manufacturing Sciences (NCMS), the US National Highway Transportation Safety Administration (NHTSA) and automaker BMW, investigated thermoplastic carbon fiber reinforced materials for vehicle sideframe structures.
The proposed B-pillar was designed to meet structural and crash safety requirements (e.g., FMVSS 214 barrier) using thermoplastic composites, which offer significant advantages (e.g., recycling, joining, >60% elongation leading to improved ductility and energy absorption) compared to thermoset composites, with the potential for improved crash performance. Novel side-impact crash concepts maximizing crash performance have been developed and commercially available thermoplastic materials were characterized to define appropriate material models and to evaluate energy absorption mechanisms.
The B-pillar, fabricated using carbon fiber in an infusion and thermoforming of tailored blanks, was optimized for energy absorption, stiffness and strength.
UD-CCM says predictive engineering at all levels, from coupon to sub-element to full-scale, guided the material down-selection. The same CAE tools simulate full vehicle to component and test setup behavior and were used to optimize manufacturability and structural/crash performance. Sub-components and B-pillars have been fabricated using the stamp forming and infusion processes, allowing scalability with the potential to meet automotive production rates. UD-CCM’s large drop tower was used to validate the predictive engineering tools and crash performance of the proposed B-pillars under realistic side-impact crash conditions.
The B-pillar design was spatially optimized for energy absorption (ductility), stiffness and strength, while maintaining part producibility and vehicle integration. BMW established B-pillar performance metrics derived from full-vehicle crash simulations and other design and integration requirements. UD-CCM provided a full range of capabilities in materials selection and evaluation, composite design, analysis and crash simulations, process development and manufacturing (tooling, part production, trimming), full-scale pillar assembly and high-energy impact testing. This project has demonstrated design, materials, manufacturing and joining methods with continuous carbon fiber thermoplastics, at technology readiness level (TRL) 4-7 to meet automotive industry and government safety specifications.
UD-CCM says key achievements from the project include:
- Successful fabrication and manufacture of an all-thermoplastic composite B-pillar that is 60% lighter than the existing metallic design while meeting project requirements for NHTSA FMVSS 214 side-impact crash
- State-of-the-art CAE tools were evaluated (with internally developed data translation) simulating full vehicle to component impact (Dassault Systemes CATIA, Altair HyperWorks & LSTC LS-DYNA)
- Innovative production methods were developed and demonstrated for this multi-material part that included infusion and thermoforming tailored blanks, with the potential to meet 2-minute cycle times
- Adhesive bonding methods were developed and automated for dissimilar thermoplastics and steel interfaces
- Automated trimming of the thermoplastic components was developed and demonstrated without damage to the composite structure
- A test fixture was designed and integrated into UD-CCM’s high-energy impact tower, simulating the crash behavior during side-impact crash without using a full vehicle structure
- Multiple full-scale B-pillar assemblies (incorporating steel roof and frame rail) were successfully impact tested under 100% equivalent energy of FMVSS 214
- The composite B-pillar's response in the vehicle sub-component configuration satisfies all of the intrusion safety requirements
- All-composite B-pillars exhibited rebound and post-impact structural integrity, fully supporting the impactor dead weight of 568.80 kg
- The impact test was simulated and compared to the experimental data (deflection, load and others), validating the predictive engineering approach
- Continuous carbon fiber thermoplastic composites are shown to exhibit improved ductility and energy absorption
Partners in the thermoplastic B-pillar project.
UD-CCM says this effort has demonstrated design, materials, manufacturing and joining methods with continuous carbon fiber thermoplastics at TRL 4-7 to meet automotive industry and government safety specifications. Results of this program will be disseminated widely to the automotive industry and the technologies are being evaluated by BMW for future platforms.
Related Content
Hexagon Purus Westminster: Experience, growth, new developments in hydrogen storage
Hexagon Purus scales production of Type 4 composite tanks, discusses growth, recyclability, sensors and carbon fiber supply and sustainability.
Read MoreThermoset-thermoplastic joining, natural fibers enable sustainability-focused brake cover
Award-winning motorcycle brake disc cover showcases potential for KTM Technologies’ Conexus joining technology and flax fiber composites.
Read MoreBio-based acrylonitrile for carbon fiber manufacture
The quest for a sustainable source of acrylonitrile for carbon fiber manufacture has made the leap from the lab to the market.
Read MoreRecycling end-of-life composite parts: New methods, markets
From infrastructure solutions to consumer products, Polish recycler Anmet and Netherlands-based researchers are developing new methods for repurposing wind turbine blades and other composite parts.
Read MoreRead Next
CFRP planing head: 50% less mass, 1.5 times faster rotation
Novel, modular design minimizes weight for high-precision cutting tools with faster production speeds.
Read MoreModeling and characterization of crushable composite structures
How the predictive tool “CZone” is applied to simulate the axial crushing response of composites, providing valuable insights into their use for motorsport applications.
Read MorePlant tour: A&P, Cincinnati, OH
A&P has made a name for itself as a braider, but the depth and breadth of its technical aptitude comes into sharp focus with a peek behind usually closed doors.
Read More