Epoxies
Swancor introduces eco-friendly epoxy hardener for PCB recyclability
Through the use of EzCiclio low-dielectric epoxy hardener, PCB manufactures can make recyclable, reusable products for electronic applications.
Read MoreSicomin epoxy resins power Candela composite boat construction
Candela’s zero-emission P-12 foiling passenger shuttle offers low vessel weight, higher journey frequency with its carbon fiber-reinforced epoxy fabrication.
Read MoreComposite molding compound replaces Invar for lightweight small satellite structures
Patz Materials and Technologies and Lawrence Livermore National Laboratory developed a new monolithic optics housing with 80% less weight, near-zero CTE and the high-volume manufacturing required for commercial space.
Read MoreMatsumoto Fine Chemical unveils solution for efficient infusion process with one-part epoxy resins
New one-part epoxy resin X-1366R shows very low viscosity and can be easily impregnated to reinforcing fibers at room temperature without resin/hardener mixing process.
Read MoreSperlu prepolymers enable high-performance epoxy resins with up to 80% bio-based content
Spero Renewables has received funding to further scale its pilot production, enabling tunable epoxy resins for composites with Tg of 65-160°C and storage modulus >2,000 megapascals.
Read MoreBio-based epoxy, recycled materials increase sustainability of all-terrain snowboards
Aiming for a smaller environmental footprint while maintaining high performance, Salomon’s Highpath snowboard line incorporates bio-based epoxy, glass and basalt fiber stringers and recycled materials.
WatchComposites manufacturing for general aviation aircraft
General aviation, certified and experimental, has increasingly embraced composites over the decades, a path further driven by leveraged innovation in materials and processes and the evolving AAM market.
Read MoreResin systems, prepreg architecture improve fabrication productivity, part quality
CAMX 2023: Resin systems and prepreg architecture from Nexx Technologies help minimize out-time tracking as well as provide the ability to produce, ship and store finished rolls of prepreg without refrigeration.
Read MoreThe Gill Corp. announces new Gillfab 4037 sandwich panel
Fiberglass-reinforced epoxy panel with aluminum honeycomb core meets corrosion and flame resistance specifications for use in nonstructural aircraft interiors.
Read MoreKanfit completes production of acceptance test part with AFP
The Ingersoll AFP machine is reported to be the first of its kind in Israel, aiding Kanfit’s R&D venture and strategy to adopt new technologies for composite production.
Watch