Reinforcements
Toray supplies HiCAM project with thermoset, thermoplastic prepreg technologies
Toray Composite Materials America and Toray Advanced Composites divisions support technologies reducing cost, improving performance and increasing delivery rates in airframe manufacturing.
Read More
AIM3D evaluates potential of composite extrusion modeling 3D printing test with PA6GF30
Glass fiber-reinforced polyamide 3D-printed test specimens proved higher tensile strength, cost effectiveness compared to injection molding and conventional 3D printing processes.
Read More
Plant tour: National Institute for Aviation Research, Wichita, Kan., U.S.
NIAR, located at Wichita State University in the heart of the American aerospace manufacturing industry, has evolved to become a premier hub of teaching, R&D, creativity and innovation.
Read More
Materials & Processes: Fibers for composites
The structural properties of composite materials are derived primarily from the fiber reinforcement. Fiber types, their manufacture, their uses and the end-market applications in which they find most use are described.
Read More
Materials & Processes: Composites fibers and resins
Compared to legacy materials like steel, aluminum, iron and titanium, composites are still coming of age, and only just now are being better understood by design and manufacturing engineers. However, composites’ physical properties — combined with unbeatable light weight — make them undeniably attractive.
Read More
Loop Technology automates complex prepreg layup through FibreFORM system
Suitable for prepreg and dry fiber materials, FibreFORM is capable of picking, placing and laying up composite plies with high accuracy and precision, with three times the speed of manual layup.
Watch
Voith Composites partnership with Gazechim Group delivers Carbon4Tool tooling system to Europe
With Gazechim Group as the European distributor, Voith hopes to empower faster, easier and more effective CFRP tool manufacturing via its next-generation technology.
Read More
Materials & Processes: Resin matrices for composites
The matrix binds the fiber reinforcement, gives the composite component its shape and determines its surface quality. A composite matrix may be a polymer, ceramic, metal or carbon. Here’s a guide to selection.
Read More
Fostering best practices for wet layup procedures
As fabricators continue to manufacture composite tools and parts using an open mold, wet layup process — often with mixed success — it’s important to stress proper preparation, materials, application methods and standardization.
Read More
The making of carbon fiber
A look at the process by which precursor becomes carbon fiber through a careful (and mostly proprietary) manipulation of temperature and tension.
Read More
.jpg;maxWidth=300;quality=90;format=webp)
