Videos
Novel prepreg for compression molding in RAPM
Solvay and Boeing combine aerospace performance with process knowledge for high-rate, low-cost composites production.
WatchNational Composites Centre leads dismantlable joints research
Adhesive additive technology is reported to make composite parts easier to dismantle, maintain and recycle.
WatchCSIRO: Developing higher-quality, higher-strength, lower-cost carbon fibers
SIROPAN precursor aims for >20% increase in carbon fiber properties with increased control via RAFT polymerization, FLOW processing and novel metrology.
WatchCevotec upgrades SAMBA Fiber Patch Placement cells for production of large aerostructures
New features enable increased efficiency for curved structures using biaxial and quasi-isotropic laminates.
Watch3D printing large composite molds with a 5-axis CNC machine
Hungarian manufacturer uses CEAD Robot Extruder to cut composite tooling time and cost.
WatchComposites industry response to the coronavirus pandemic, Part 1
A compilation of CompositesWorld’s coverage of how the pandemic has affected the composites industry, through March 31, 2020.
WatchRevolutionizing the composites cost paradigm, Part 1: Feedstock
Highly-aligned, short-fiber Tailorable Universal Feedstock for Forming achieves aerospace properties, metal-like formability in zero-waste, fiber-to-parts pilot plant.
WatchComposites Index contracts on weak backlogs
For February 2020, the Composites Index contracted slightly with a reading of 49.7.
WatchIndustrial production line for recycling thermoplastic polymers and composites into organosheet
ThermoPRIME and Thermosaïc technologies recycle plastic and composite waste via modular, flexible equipment.
WatchDucommun licenses WSU lightning strike protection for composite wind blades
New technology showed no damage after up to 8 lightning strikes and can be repaired in 20 minutes.
WatchArtemis Technologies and Creative Composites partner on eFoiler to cut drag on fast vessels by 90%
Composites-intensive electric propulsion system will make marine travel at high-speed and long-range commercially viable and help meet U.K.’s 2025 zero-emissions requirements.
WatchNational Composites Centre unveils digital composites technologies
The U.K.’s National Composites Centre unveils new composites manufacturing technologies, marking the culmination of a two-year, £36.7m digitization project.
Watch