Early on Nov. 5^th, a new generation of carbon fiber-reinforced composite space materials developed by scientists at the University of Bristol (U.K.) was launched to space via a Space X rocket. The rocket is headed to the International Space Station (ISS), where the materials will undergo testing in the extreme conditions of low Earth orbit to determine their ability to be used to build things like future space stations, spacecraft for interplanetary travel or a new ISS.

The composite materials will be placed on the Bartolomeo platform, located on the front of the ISS, where they will orbit Earth up to 9,000 times over the next 12-18 months at speeds of 17,000 miles per hour. They will need to survive temperatures between -150ºC and +120ºC, space debris traveling seven times faster than a bullet, severe electromagnetic radiation, and high vacuum and atomic oxygen, which erodes even the toughest materials.

“Space is the most challenging environment for which to design new materials,” explains Professor Ian Hamerton. He teaches in Polymers and Sustainable Composites department of the University of Bristol’s Bristol Composites Institute. “You’re pitting your materials expertise, skills and ingenuity against extremes of temperature, mechanical stress, radiation, high speed impacts and more. Any one of those might be difficult, and, unfortunately, gaining access to repair them is not an easy option, so the materials we build must survive without maintenance. The opportunity to test our materials in the proving ground of space is priceless and will help our University of Bristol scientists on the ground improve fiber-reinforced materials for next-generation space missions.”

There are four laboratory-made polymers heading to the ISS, each of which has been reinforced with carbon fibers and two contain nanoparticles. All four are the result of University of Bristol research and one is patented.

If the materials cope in the harsh environment, they could be used to create longer-lasting space components, enabling spacecraft to travel further, and spend more time in space.

For related content, read “High glass transition temperature, 100% bio-based thermoset resins for space composites”

Future communities on new planets, for instance, will need protection against galactic cosmic radiation. Dr. Ali Kandemir, senior research associate at the University of Bristol, is one of several Bristol researchers, supported by the UK Space Agency (UKSA), examining the effects of simulated galactic cosmic radiation on the materials in a European Space Agency (ESA) project.

“We want materials that are resilient in the space environment and, importantly, materials that can shield humans from that radiation,” says Kandemir. “We also want to make these materials sustainable, so that when they reach the end of their life they can be recycled and used again for the same purpose.”

The launch of the Space X Dragon CRS-2 spacecraft this month is the culmination of 5 years of work for Hamerton and his team. It has included the efforts of early career researchers, postgraduates and several aerospace engineering undergraduates at the University of Bristol, whose final year research projects have been linked to the space materials project.

The support of the University of Bristol-hosted National Composites Centre (NCC, U.K.) was crucial to the scale up of the composite materials. Funding to support the project was supplied by the ESA, the UKSA, Oxford Space Systems and others.