CompositesWorld News
Milliken & Co. partners with MMI Textiles to offer Tegris thermoplastic
The commercial market partnership enables easier access to the Tegris thermoplastic composite fabric for defense customers in the quantities that they require.
Read MoreQarbon Aerospace successfully completes icing tunnel test for Helios system
Patented Helios Ice Protection technology uses an embedded heated graphite layer to heat composite structures significantly faster than legacy systems.
Read MorePlasmaBound raises funding to accelerate bonding technology adaptation
Irish Startup earned €3.1 million in 2022 to brings its controlled polymer ablation (CPA) technology for composite materials to mass-market applications.
Read MoreBYK expands additive production capacity with Shanghai facility
The Shanghai-integrated site, designed for an annual capacity of 4,750 tons, is the next step in BYK’s global productions strategy in the near and long term.
Read MoreStratolaunch completes second TA-0 captive carry flight
The ongoing flight test program continues on target towards separation test and the first hypersonic flight of TA-1 within the first half of 2023.
Read MoreZeroAvia successfully flies hydrogen-electric Dornier 228 testbed aircraft
The 19-seat twin-engine aircraft took to the skies for the first time as part of the HyFlyer II project, moving ZeroAvia toward its 2025 targets and scaling the technology to larger airframes.
Read MoreSiemens, Deloitte demonstrate Industry 4.0 innovation at The Smart Factory @ Wichita
New dedicated space enables companies to experience the future of smart manufacturing and the power of digitalization using the Siemens Xcelerator portfolio.
Read MorePlataine FabricOptimizer increases aerospace composites manufacturing production rates
New capabilities have been unveiled — including a procurement simulator, “nesting around defects” solution and detailed reports — to improve the ordering process, reduce waste and enhance efficiency.
Read MoreTPI, WindSTAR create digital twin for wind blade manufacturing
Machine learning framework provides real-time feedback during composite fabrication process, with some cases achieving 95% predictive accuracy and computation faster than physics-based simulations.
Read MoreFujitsu, Teijin start joint trials to promote value of recycled carbon fiber
Three-month trials with German bicycle manufacturers will lead to new platform implementation to promote use of recycled materials, enable emissions tracing/management.
Read More