Reinforcements
Mercedes-AMG GT4 race cars now equipped with Bcomp natural fiber composite bumpers
Bcomp works with engineering specialist HWA to phase in natural fiber bumpers, replacing carbon fiber versions. Analyses report a 90% reduction in material emissions and thermal energy recovery potential.
Read More
Refurbishing bridges at half the time, cost versus replacement
Instead of demolishing and rebuilding bridges, SUREbridge doubles the strength and durability of existing structures with an FRP deck for a smart, sustainable solution.
Read More
Basanite basalt rebar chosen to reinforce underground concrete structures
Indian Creek Village, an island municipality located in Florida, selected BasaFlex and BasaMesh fiber reinforcement products as alternatives to steel rebar.
Read More
INCA Renewtech to build advanced biocomposites manufacturing facility in Alberta, Canada
The fiber processing and composites manufacturing facility will ramp up INCA’s production of highly refined short and long fibers to substitute increasingly scarce balsa wood in boats, wind turbine blades, rail and automotive.
Read More
Cycling forward with bike frame materials and processes
Fine-tuning of conventional materials and processes characterizes today’s CFRP bicycle frame manufacturing, whether in the large factories of Asia or at reshored facilities in North America and Europe. Thermoplastic resins and automated processes are on the horizon, though likely years away from high-volume production levels.
Read More
Long-fiber liquid crystal polymers
High-performance, injection moldable grades to be offered with long glass, carbon fiber options.
Read More
Saint-Gobain, Roctool join efforts to boost composite 3D textile preform parts manufacturing
3D automated knitted preform layup technology and heat and cooling technologies for additional curing efficiency open a new window of application opportunities for composite and thermoplastic parts.
Read More
Ilium Composites chopped strand mat demonstrates compatibility, sustainability and durability
Chopped strand mat (CSM) under the ULTImat range of reinforcements protects against osmosis and chemical erosion for maritime and relevant constructions while delivering smooth surface finishes.
Read More
NCC and Synthesites work toward intelligent manufacturing for resin infused composites
The National Composites Centre (NCC) and Synthesites develop an advanced closed loop control system for resin infusion with non-invasive sensors, real-time resin flow monitoring and accurate, in-situ estimation of online viscosity and glass transition temperature.
Read More
CompoTech, Bilsing carbon fiber gondola beam development key for simplifying tooling management
Stiffer EOAT design for automotive tandem press line tooling increases load capacity and productivity, overcomes strokes per minute limitation and improves factory interchangeability.
Read More
