CW Blog
Connecting the Dots: Generative design, bionic structures and future composites
The trend shows cast and 3D printed metal, but fiber-reinforced composites offer the potential for multifunctional structures.
Read More
SPE ACCE 2018 preview
Mobility composites are expected to draw an international crowd to this annual Motor City gathering.
Read MoreQ&A: Tom Lemire, TFLemire Consulting
CW Talks: The Composites Podcast, recently spoke to Tom Lemire, currently principal of TFLemire Consulting (Irvine, CA, US) and a longtime veteran of the composites industry. Lemire’s career spans back to the late 1960s, and he eventually did most of his work in the composites industry for carbon fiber suppliers BASF and Toho Tenax (now Teijin).
Read More
Composites Index trending lower but still in growth mode
The GBI: Composites Fabricating Index for June registered 56.5, indicating that the US composites industry was experiencing modestly slower growth compared to the preceding three months.
Read MoreLakes, rivers and the high seas: Boating’s influence on composites
We have the marine industry to thank for many of the advances seen in large-part composites fabrication.
Read More
U.S. styrene-reduction mandates: Go or no-go?
Legislative changes are slow in coming, but technology forges ahead.
Read MoreReinforced phenolics: Still disruptive after all these years
Fiber-reinforced phenolics could be a key enabler of a coming automotive industry disruption.
Read More
Looking backward, looking forward
Honoring a friend in composites, and focusing on the leaders of the future.
Read More
Plant Tour: Agility Fuel Solutions, Salisbury, NC, US
This systems integrator enables CFRP pressure vessel growth in commercial vehicles by combining composites and alternative fuel systems expertise.
Read MoreStyrene ≠ polystyrene: An important distinction for composites
Definitions are important when discussing technology. Although often used interchangeably, the terms styrene and polystyrene refer to different materials.
Read More
Infused wing sheds light on aerocomposites future
In the Irkut MS-21 infused and co-cured wings, the aerocomposites industry gets a glimpse of how out-of-autoclave technologies might be applied to primary aircraft structures.
Read More
Live Demos: The Benefits of Seeing Technology in Action
Live demos at trade shows give you an exclusive look at current and emerging technology and how it’s being used. Here’s what you can learn from them.
Read More
