Webinar presentation: Next-Generation Composites Materials and Processes (July 2020)
CompositesWorld hosted on July 28, 2020, a webinar titled, “Next-Generation Composite Materials and Processes.” If you missed the live webinar, you can watch the recording or download a PDF of the presentation.
Source | CW
CompositesWorld hosted on July 28, 2020, a webinar titled, “Next-Generation Composite Materials and Processes.” If you missed the live webinar, you can watch the recording here, or download a PDF of the presentation by clicking the below link.
Thank you for your interest in CompositesWorld.
Related Content
-
Combining multifunctional thermoplastic composites, additive manufacturing for next-gen airframe structures
The DOMMINIO project combines AFP with 3D printed gyroid cores, embedded SHM sensors and smart materials for induction-driven disassembly of parts at end of life.
-
ATLAM combines composite tape laying, large-scale thermoplastic 3D printing in one printhead
CEAD, GKN Aerospace Deutschland and TU Munich enable additive manufacturing of large composite tools and parts with low CTE and high mechanical properties.
-
Manufacturing the MFFD thermoplastic composite fuselage
Demonstrator’s upper, lower shells and assembly prove materials and new processes for lighter, cheaper and more sustainable high-rate future aircraft.
