Cygnet Texkimp builds high-precision slitter spooler rewinder for industry trials
Demonstration machine can precisely slit and wind up to 48 tapes from continuous thermoset UD carbon fiber prepreg, with additional material compatibilities.
Composites technology company Cygnet Texkimp (Cheshire, U.K.) has built a production-scale, high-precision slitter spooler rewinder machine for industry trials at its U.K.-based Innovation Centre.
The technology has been developed to slit and wind continuous thermoset unidirectional (UD) carbon fiber prepreg into tapes, although the company says it is compatible with many other materials. The machine is expected to attract interest from manufacturers in the aerospace and high-end automotive industries where high-precision slit tapes are used to manufacture critical components using filament winding, automated tape laying (ATL) and automated fiber placement (AFP).
Providing access to the technology will reportedly enable prepreg convertors and component manufacturers to carry out comprehensive trials using their own materials and specifications. It will also enable Cygnet Texkimp to prove the machine’s capability, including tape width control of 0.1 millimeter and process capability index (Cpk) of 1.33.
“We built the demonstration machine to prove very clearly what this technology can achieve and offer a valuable source of product development in a slit tape market poised for significant growth,”Cygnet Texkimp wide web product director Graeme Jones says.
Cygnet Texkimp’s slitting technology draws on the company’s depth of experience in handling complex technical fibers to deliver high-accuracy slit tapes consistently and reliably.
“The level of precision we are able to achieve here is second-to-none in the market,” Jones contends. “That’s really important, particularly for applications using ATL and AFP which rely on accuracy to eliminate gaps and overlaps between tapes to create the most efficient high-performance components.”
Prepregs present challenges in handling and processing because of their stickiness or tackiness. Fibers in thermoset prepregs are still pliable within the uncured resin matrix and are therefore prone to dimensional instability if handled incorrectly. This can lead to fiber separation and damage in the form of fraying at the edges of the material, known as material stringers. If left unchecked, these can result in problems further down the process and ultimately jeopardize the quality of the finished part. Cygnet Texkimp’s machine has been developed with design elements including slitting arrangements and tape handling to minimize these challenges.
“Our slitter spooler rewinder is the result of decades of engineering expertise and understanding of material behavior to create a machine that can run continuously with very minimal fraying, stringers, debris or material scrappage,” Jones adds.
The demonstration machine has been designed to slit four tapes but is scalable to 48 tapes with the addition of modular winding heads. It is also capable of converting wide rolls of poly to be used as the interleaf in the finished prepreg spools.
Related Content
-
Cryo-compressed hydrogen, the best solution for storage and refueling stations?
Cryomotive’s CRYOGAS solution claims the highest storage density, lowest refueling cost and widest operating range without H2 losses while using one-fifth the carbon fiber required in compressed gas tanks.
-
Sulapac introduces Sulapac Flow 1.7 to replace PLA, ABS and PP in FDM, FGF
Available as filament and granules for extrusion, new wood composite matches properties yet is compostable, eliminates microplastics and reduces carbon footprint.
-
Novel dry tape for liquid molded composites
MTorres seeks to enable next-gen aircraft and open new markets for composites with low-cost, high-permeability tapes and versatile, high-speed production lines.