Connecting the composites industry

All Topics See All

Additive Manufacturing

Adhesives

Advanced Air Mobility

Aerospace

Application

ATL/AFP

Autoclave

Automation

Automotive

Biomaterials

BMI

Bonding

Braiding

CAMX

Carbon Fibers

Ceramic Matrix Composites

Coatings

Composites 4.0

Composites Basics

Compression Molding

Construction

Consumer

Core

Curing

Custom Content

Cutting/Kitting

CW Top Shops

CW Trending

Cyanate Ester

Defense

Design & Tooling

Design and Testing

Design/Simulation

Digital Demos

Digitization

Economics

Editorial

Electric Vehicles

Electronics

Epoxies

Fabrics/Preforms

Fastening

Feature

Filament Winding

Finishing & Fastening

Focus on Design

FRP Rebar

Glass Fibers

Hi-Temp Resins

Hydrogen Storage

IACMI

Infrastructure

Infusion

Injection/Overmolding

Inside Manufacturing

JEC

Job Postings

Ketones

Lifecycle Analysis

Machining/Drilling

Marine

Market Outlook

Markets

Mass Transit

Materials

Materials Testing

Medical

Molds/Tools

Nanomaterials

National Composites Week

Natural Fibers

NDI

Out of Autoclave

Past, Present and Future

Plant Tours

Post Cure

Predicting Failure

Prepregs

Pressure Vessels

Processes

Pultrusion

Recycling

Reinforcements

Repair

Resins

RTM

Sensors

Sheet Molding Compound

SHM

Space

Sustainability

Thermoplastics

Trends

Troubleshooter

Weaving

Welding

Wind/Energy

Work In Progress

Workforce Development
Markets See All

20 Nov 2024 Advanced Air Mobility
Vertical Aerospace completes Phase 2 piloted flight testing
VX4 eVTOL aircraft prototype begins untethered, piloted, thrust-borne testing following expansion of permit to fly from the UK Civil Aviation Authority.

18 Nov 2024 Advanced Air Mobility
Beta begins Alia CTOL production aircraft flight testing
Flight of first production aircraft fresh off Beta’s full-scale manufacturing line in Vermont is followed by Special Airworthiness certification from the FAA.

15 Nov 2024 Advanced Air Mobility
Lilium launches M&A process, targets eVTOL program continuation
Despite court-approved insolvency filings and beginning first investor briefings, Lilium remains fully focused on re-emerging following restructuring, setting its sights on fresh investment to support the Lilium Jet.

11 Nov 2024 Advanced Air Mobility
Archer Aviation signs eVTOL aircraft purchase with Japan
Japan Airlines’ and Sumitomo’s joint venture company intends to purchase up to 100 Midnight aircraft to certify and commercialize AAM services across Japan.

4 Nov 2024 Automotive
Hexagon Agility receives wave of RNG fuel system orders for Class 8 trucks
RNG/CNG fuel system installations with Type 4 CFRP pressure vessels, powered by Cummins’ 15-liter natural gas tank, adds 230,000 heavy-duty trucks to the addressable RNG/CNG market annually.

4 Nov 2024 Advanced Air Mobility
VoltAero opens facility in France for Cassio aircraft
VoltAero inaugurates its industrial facility in Rochefort for the final assembly line for the family of Cassio electric-hybrid aircraft, to incorporate composite elements.
Design & Tooling See All

22 Nov 2024 Past, Present and Future
The evolution, transformation of DEA from lab measurements to industrial optimization
Over the years, dielectric analysis (DEA) has evolved from a lab measurement technique to a technology that improves efficiency and quality in composites production on the shop floor.

19 Nov 2024 Materials Testing
Proving thermoplastic composites match carbon fiber/epoxy performance in road bikes
CDCQ, LxSim, Addcomp and Argon 18 collaborate to optimize a carbon fiber/PA6 bike seat post, democratizing AFP and demonstrating materials and process for future designs and production.

6 Nov 2024 Materials Testing
University of Bristol launches composite materials to space for ISS testing
Next-gen carbon fiber materials will be tested under extreme conditions for 12-18 months to determine their viability in space for use in future space bases, interplanetary travel.

25 Oct 2024 Out of Autoclave
Bladder-assisted compression molding derivative produces complex, autoclave-quality automotive parts
HP Composites’ AirPower technology enables high-rate CFRP roof production with 50% energy savings for the Maserati MC20.

3 Oct 2024 Design/Simulation
Solico software suite now includes horizontal tank module
Solico Engineering introduces the module to complete its Amphora calculation tool, made for the design of fiber-reinforced silos and tanks.

2 Oct 2024 Additive Manufacturing
Juggerbot 3D announces MSU, ORNL as partners for hybrid LFAM composites project
Air Force-funded initiative looks to LFAM thermoset, thermoplastic advancement for fast, inexpensive composite tooling production.
Materials See All

22 Nov 2024 Ceramic Matrix Composites
NonWoven365 offers nonwovens, paper solutions portfolio targeting CMC, high-temp applications
Stuttgart-based company offers carbon, metal and ceramic fiber-based papers and nonwovens in various areal weights and thicknesses, engineered for high-temperature, sustainable application requirements.

22 Nov 2024 Fabrics/Preforms
Biesterfeld gains composites distribution rights from Saertex
Under the new strategic distribution partnership, Biesterfeld will be the official sales partner for various Saertex material products to the German market.

21 Nov 2024 Repair
Developing bonded composite repair for ships, offshore units
Bureau Veritas and industry partners issue guidelines and pave the way for certification via StrengthBond Offshore project.

20 Nov 2024 Epoxies
Bio-based composite Skaw A foiling scow yacht is built with Greenpoxy resins
Sicomin has partnered with Skaw Sailing and Shoreteam to deliver a foiling yacht design for cruising that embodies durability and performance with a low environmental impact.

20 Nov 2024 Application
Optimized CFRP gantry beam enhances Ultimate cutting machines
CompoTech, Kongsberg PCS collaboration integrates foam-cored design, automated placement of pitch and PAN fibers to achieve award-winning increase in speed and precision.

19 Nov 2024 Aerospace
Project Greenlift to develop ground-effect Cicada222x prototype
Bio-inspired Australian-made craft featuring hemp-reinforced fuselage panels and sustainable fuel capabilities is positioned to meet disaster relief, e-commerce and military needs.
Processes See All

22 Nov 2024 Curing
Wisconsin Oven ships curing oven for filament-wound composites
Gas-fired batch oven is designed to process up to 5,000 pounds of filament-wound parts at a time, while delivering on optimal temperature uniformity and efficient use of floor space.

20 Nov 2024 Bonding
AnalySwift receives NASA STTR contract to enable second-use spacecraft infrastructure
Together with Purdue, AnalySwift aims to develop a composite heater layer and a novel software tool or module to achieve assembly, disassembly of thermoplastic composite joints in space during long-duration missions.

20 Nov 2024 Additive Manufacturing
CEAD launches application-specific, cartesian-style Flexcube printing cell
Fully automated, all-in-one 3D printing platform handles high-rate industrial-sized composite parts printing and postprocessing in a compact, accessible design.

20 Nov 2024 Cutting/Kitting
Optimized CFRP gantry beam enhances Ultimate cutting machines
CompoTech, Kongsberg PCS collaboration integrates foam-cored design, automated placement of pitch and PAN fibers to achieve award-winning increase in speed and precision.

19 Nov 2024 Design/Simulation
Proving thermoplastic composites match carbon fiber/epoxy performance in road bikes
CDCQ, LxSim, Addcomp and Argon 18 collaborate to optimize a carbon fiber/PA6 bike seat post, democratizing AFP and demonstrating materials and process for future designs and production.

18 Nov 2024 Infusion
Sunreef Yachts completes 43-meter single-shot hull infusion project
Sunreef 43M Eco electric catamaran, with a composite surface of 1,700 square meters, is considered to have the world’s largest infused hull.
Composites 101 See All

14 Nov 2024 Composites Basics
CW Tech Days — Upcoming and past events
CW Tech Days are virtual events dedicated to the topics impacting the composites industry today. Access past event recordings and register for upcoming Tech Days.

17 Jul 2024 Composites Basics
Five things you get with your CW subscription
Reliable news and information on where and how fiber-reinforced composites are being applied — that’s just the start of what you get from our team here at CompositesWorld.

20 Feb 2024 Thermoplastics
Composites end markets: Electronics (2024)
Increasingly, prototype and production-ready smart devices featuring thermoplastic composite cases and other components provide lightweight, optimized sustainable alternatives to metal.

25 Aug 2023 Composites Basics
Celebrating 30 years of CompositesWorld, Part 1
CW explores key composite developments that have shaped how we see and think about the industry today.

21 Jul 2023 Troubleshooter
The basics of composite drawing interpretation
Knowing the fundamentals for reading drawings — including master ply tables, ply definition diagrams and more — lays a foundation for proper composite design evaluation.

27 Jan 2023 Troubleshooter
Proper application of semi-permanent mold release systems
Performing regular maintenance of the layup tool for successful sealing and release is required to reduce the risk of part adherence.
- Webinars
- Events
- Suppliers
- Whitepapers
Webinars See All

10 Dec 2024
AI-Powered Scheduling for Composites: How Multi-Ply Automatically Generates Optimal Production Plans Within Minutes
Discover how Multi-Ply, a leading composite parts manufacturer, revolutionized composite production planning with Plataine’s AI-powered solution. This webinar will detail how an AI scheduling solution, designed for composite manufacturing, minimizes delays, optimizes resource allocation and drives higher throughput. Hear directly from Multi-Ply’s team on their journey to digitize planning and create accurate, large-scale production plans in minutes. Learn how automated scheduling allowed them to overcome the unique challenges of composite manufacturing, improving production accuracy, managing bottlenecks and optimizing factory resources. Gain actionable insights to automate your composite production planning, increase plan accuracy, respond quickly to production issues and leverage simulations supporting strategic decisions and growth in composites.

On Demand
Composite Technology for Advanced Air Mobility Blades
Composite materials are being successfully adopted for certification and low initial rate production (LRIP) in eVTOL aircraft variants today. As demand for eVTOL grows, vehicle build rates will increase and the challenge of high-rate composite production will become a reality. Syensqo is developing composite material solutions to meet the most demanding requirements for eVTOL's vehicles of today and tomorrow. This presentation will focus on the key drivers and Syensqo's approach to unlocking the full potential of composite materials for eVTOL blades. Agenda: A review of the advanced air mobility market status The future challenges facing composite materials adoption Key drivers for advanced air mobility rotor blades Syensqo's advanced materials solutions for blades

On Demand
Navigating the Shift: Composite Solutions for Modern Aircraft Interiors
As the aircraft interiors industry increasingly moves towards circular and sustainable solutions, it's crucial for the supply chain to adopt these innovations to stay competitive. Advanced thermoplastic composites present significant advantages, including faster production, improved recyclability and reduced weight. Join Toray for this insightful webinar where they will dive into the latest developments in thermoplastic composites and their applications in aircraft interiors. Toray will explore how these materials enable the efficient manufacture of parts while improving overall sustainability and meeting the stringent FST standards of the aviation sector. Whether you're a design engineer, materials specialist or industry professional, this session will provide valuable insights into how thermoplastic composites can drive innovation and competitiveness in aircraft interiors.

On Demand
Reinventing Quality and Efficiency in Aerospace Composites: Leveraging Dielectric Analysis for Process Control
How does a cutting-edge measurement technology evolve into a solution that drives real-time insights and transforms quality control and efficiency in composites manufacturing for aerospace applications? In this exclusive interview-style webinar, sensXPERT managing director Dr. Alexander Chaloupka will sit down with Jorge Blanco Fernandez, R&T engineer at Ensia (the Spanish entity of Testia, an Airbus Company), to uncover the story of how dielectric analysis (DEA), once a lab-based measurement tool, was transformed into a comprehensive solution for process control in the production of composite aerospace parts. Discover how Testia is constantly seeking new technologies to improve manufacturing processes and chooses dielectric measurement for its potential — only to encounter the challenges of complex data analysis. Learn how sensXPERT took this challenge head-on, turning dielectric technology into a scalable solution with automated data analysis, real-time process adjustments and in-mold material behavior insights that directly connect to quality standards. Agenda: Discovering dielectric measurement technology Complying with industry regulations The transformation to a full solution The sensXPERT process control solution Benefits and impact on aviation manufacturing

On Demand
Transforming Composites: AI-Driven Inspection for Composite Fabrication
This webinar will dive into how advanced AI neural network technology can streamline your composite inspection process, offering unparalleled speed, accuracy, real-time inspection and monitoring. Learn how automating inspections can help manufacturers improve efficiency, reduce errors and ensure consistent high-quality production. See the technology in action and explore how integrating AI can overcome your inspection challenges and elevate your operations. Agenda: AI neural network overview Flexible AI camera integration with IRIS 3D platform Precision detection capabilities Real-time monitoring and alerts Process digitization and tracking Why automate? - benefits of automating the inspection process Next steps: how to get started

On Demand
Delivering RF and EMI Technologies for the Current and Future Fight
The composites industry plays a crucial role in developing lightweight and durable materials for a range of applications, including those critical to national defense. One key focus area is the development of advanced structural materials and manufacturing technologies that support next-generation space, missile and aircraft systems for the U.S. Department of Defense (DOD). ARC Technologies LLC (ARC), a division of Hexcel Corporation, based in Amesbury, Massachusetts, is a provider of advanced composites structures, specialty materials and other unique products that provide the U.S. Department of Defense with advanced capabilities to protect service members while in harm’s way. This team’s specialty is to understand a specific need from a program office, PEO, platform manufacturer or other offices within the DOD. With that understanding, the team can design a solution, develop a prototype for test and evaluation, perform extensive in-house testing — including electromagnetic, environmental and structural testing — and then partner with the customer through platform evaluation. The Hexcel Amesbury division has a team of engineers on staff, including mechanical, chemical, electrical and research and development specialists that can provide design, testing and manufacturing capabilities to service customer requirements from concept through production. This presentation will illustrate capabilities in advanced composites and other specialty materials structures, focusing on the Hexcel Amesbury team's niche in electromagnetic signature reduction and other unique capabilities.

3 Dec 2024 New & Upcoming
Troubleshooting Prepreg Cure Failure Modes with Rheological Measurements Register Now
Events See All

10 Jan 2025
Detroit Auto Show
The Detroit Auto Show, formerly known as the North American International Auto Show (NAIAS), is located squarely at the intersection of technology and mobility. It’s a global event filled with tangible advances ready to hit the pavement today. Here, the software is as revolutionary as anything out there, and the hardware always looks better with a good polish. You won’t find any devices that will fit in your pocket, but you will discover machines that will move you in the most literal sense. You’ll also connect with thought leaders from around the world, both in and outside the automotive industry, whose collective visions for the future of mobility will shape the way we move for years to come.

21 Jan 2025
International Conference & Exhibition on Reinforced Plastics (ICERP)
ICERP India is an important event of the Indian composites industry organized by FRP Institute. The focus of the 2025 show will be up-gradation of composites technology in India to reach global level in terms of product quality, finishing and also to address the challenges that have to be met to achieve global standards.

26 Jan 2025
ASTM International January 2025 Committee Week
Over 12,000 ASTM standards operate globally. Defined and set by ASTM, these standards improve the lives of millions every day. Twelve ASTM committess will meet in Houston, Texas, in January 2025.

26 Jan 2025
Composites, Materials & Structures (CMS) Conference
The annual Conference on Composites, Materials, and Structures (also known as the Cocoa Beach Conference) is the preeminent export controlled and ITAR restricted forum in the United States to review and discuss advances in materials for extreme environments. The Conference started in the 1970s as a small informal gathering for government and industry to share information on programs and state-of-the-art technology. Attendance has grown to nearly 500 people while preserving this same objective to share needs and trends in high-temperature and extreme environment materials, and the latest information on advanced materials and manufacturing processes. The five-day conference program includes two to three parallel sessions per day on topics including thermal protection materials, ceramic matrix composites, carbon-carbon materials, ballistic technologies, hypersonics, and gas turbine engines. Attendees are engineers, scientists, managers, and operational personnel from the turbine engine, aviation, missiles and space, and protective equipment communities. These communities include the Navy, Air Force, Army, MDA, NASA, DARPA, FAA, DOE, engine manufacturers, missile and aircraft manufacturers, commercial space companies, and material and component suppliers. Participation is limited to U.S. Citizens and U.S. Permanent Residents only with an active DD2345 certification.

4 Mar 2025
JEC World 2025
JEC World gathers the whole value chain of the composite materials industry in Paris (France) every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

5 Mar 2025
SE Summit 25 Paris
The Summit consists of a range of 12 high-level lectures by 14 invited speakers. Topics are composites-related innovations in automotive/transport, space/aerospace, advanced materials, process engineering, as well as challenging applications in other markets like architecture, construction, sports, energy, marine and more. High-ranked speakers are from China, Japan, USA, and Europe. Attendees are managers of CEO and CTO level in leading companies, engineers, scientists, and professionals from throughout the advanced materials and processes industry and universities. The conference day starts at 9 AM and ends with a networking dinner in the Pullman with outside a magnificent view on the Eiffel Tower. It is an outstanding occasion for networking with interesting colleagues and meeting new contacts.

12 Dec 2024 New & Upcoming
The Cool Parts Show LIVE Register Now
Suppliers See All

Auxiliary processing equipment, repair equipment, and supplies

Composite Structures & Components

Design, testing, consulting, other services

Fabricating Services

Fiber converting/prepreg manufacturing equipment

Materials

Primary manufacturing equipment

Testing, gauging, monitoring, analytical equipment and software

Tool Types

Tools/tooling materials

Get Listed!
Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.
Request Your Free Listing
Whitepapers See All

10 Jan 2024
Jetcam addresses the economic importance of efficient material nesting
Jetcam’s latest white paper explores the critical aspects of nesting in composites manufacturing, and strategies to balance material efficiency and kitting speed.

8 Jan 2024
Arris Composites demonstrates advantages of natural fibers applied with Additive Molding
Arris presents mechanical testing results of an Arris-designed natural fiber thermoplastic composite in comparison to similarly produced glass and carbon fiber-based materials.

27 Dec 2023
Cevotec white paper presents novel approach for H2 tank production
Cevotec, a tank manufacturer, Roth Composite Machinery and Cikoni, have undertaken a comprehensive project to explore and demonstrate the impact of dome reinforcements using FPP technology for composite tanks.

23 Nov 2023
KCARBON and KIST develop lyocell/PLA/wood biocomposites
Initial demonstration in furniture shows properties two to nine times higher than plywood, OOA molding for uniquely shaped components.

1 Nov 2023
Exel Composites releases guide for design considerations in composite tubes
The composite tubes white paper explores some of the considerations for specifying composite tubes, such as mechanical properties, maintenance requirements and more.

21 Jul 2023
UAMMI white paper addresses composites recycling in Utah
Foundational research discusses the current carbon fiber recycling landscape in Utah, and evaluates potential strategies and policies that could enhance this sustainable practice in the region.
Articles See All

21 Nov 2024 Marine
Developing bonded composite repair for ships, offshore units
Bureau Veritas and industry partners issue guidelines and pave the way for certification via StrengthBond Offshore project.

20 Nov 2024 Cutting/Kitting
Optimized CFRP gantry beam enhances Ultimate cutting machines
CompoTech, Kongsberg PCS collaboration integrates foam-cored design, automated placement of pitch and PAN fibers to achieve award-winning increase in speed and precision.

19 Nov 2024 Thermoplastics
Proving thermoplastic composites match carbon fiber/epoxy performance in road bikes
CDCQ, LxSim, Addcomp and Argon 18 collaborate to optimize a carbon fiber/PA6 bike seat post, democratizing AFP and demonstrating materials and process for future designs and production.

18 Nov 2024 NDI
VIDEO: AI, cameras and lasers for FOD detection
Virtek Vision demonstrates its Iris AI technology at CAMX 2024. It combines laser projection with machine learning software to detect foreign object debris during a composite layup.

15 Nov 2024 Aerospace
Composites business growth through diversification, innovation
San Diego-based 2024 Top Shops qualifier Rock West Composites gives an overview of its relentless commitment to improvement, including its composite capabilities and its role as a trusted player in the space market.

13 Nov 2024 Economics
Overall composites index contracting faster than previous month
New orders, production and prices components all improved over October, though the GBI is still seeing contraction.

22 Nov 2024 Materials Testing
The evolution, transformation of DEA from lab measurements to industrial optimization
Sustainability See All

15 Nov 2024 Aerospace
NASA selects Electra for hybrid-electric aircraft concepts in AACES 2050 Program
Electra will identify and deliver various concepts and technologies for future sustainable commercial airline development, which could enter service by mid-century.

15 Nov 2024 Marine
MarineShift360 project launches new initiatives for marine industry sustainability
Life cycle assessment (LCA) tool and Industry Accelerator and University Outreach programs are designed to fast-track decarbonization as regulatory frameworks tighten and consumer demand for sustainability grows.

10 Nov 2024 Filament Winding
Mikrosam robotic filament winding cell to aid Cidetec composites projects
Delivery of the single-spindle robotic setup with an ATP head will advance the R&D organization’s work in CUBIC, GENEX and Carbo4power initiatives targeting sustainable composites development.

6 Nov 2024 Thermoplastics
Corebon, Composite Braiding partner to enhance TPC manufacturing
Collaboration aims to overcome production limitations with tubular thermoplastic composites (TPC) by using induction-heated tooling and high-quality commingled braids.

4 Nov 2024 Sustainability
Changing future outcomes with the materials of the future
This past October was plagued with a series of unfortunate natural disasters that, amidst ongoing travel for CW, has provided a poignant reminder of composites’ importance in facing future events.

30 Oct 2024 Sustainability
Nlcomp is selected as a World Sailing award finalist for rComposite
Third World Sailing award nomination highlights the company’s focus on marine innovation using sustainable composite materials.

22 Nov 2024 Sustainability
BIOntier project studies multi-sector biocomposites development
Knowledge Centers

CompositesWorld Collections
CW’s editors are tracking the latest trends and developments in tooling, from the basics to new developments. This collection, presented by Composites One, features four recent CW stories that detail a range of tooling technologies, processes and materials.

Sensors for Composite Processing

The Now and Next in Composites

Closed Molding Knowledge Center
Closed mold processes have many advantages over open molding. In this knowledge center, learn the basics and vital tools needed to produce parts accurately.

Sustainability
The composites industry is increasingly recognizing the imperative of sustainability in its operations. As demand for lightweight and durable materials rises across various sectors, such as automotive, aerospace, and construction, there is a growing awareness of the environmental impact associated with traditional composite manufacturing processes.

Automated Composites
In the Automated Composites Knowledge Center, CGTech brings you vital information about all things automated composites.
CW Tech Days

Composites in Infrastructure and Construction
CompositesWorld’s CW Tech Days: Infrastructure event offers a series of expert presentations on composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in Advanced Air Mobility
Explore the cutting-edge composites industry, as experts delve into the materials, tooling, and manufacturing hurdles of meeting the demands of the promising advanced air mobility (AAM) market. Join us at CW Tech Days to unlock the future of efficient composites fabrication operations.

Thermoplastics for Large Structures
Thermoplastics for Large Structures, experts explored the materials and processing technologies that are enabling the transition to large-part manufacturing.

Sustainability in Composites Manufacturing
Explore the technologies, materials, and strategies that can help composites manufacturers become more sustainable.

Design, Simulation and Testing Technologies for Next-Gen Composite Structures
CompositesWorld’s Tech Days: Design, Simulation and Testing Technologies for Next-Gen Composite Structures is designed to provide a multi-perspective view of the state of the art in design, simulation, failure analysis, digital twins, virtual testing and virtual inspection.

New Space Applications
Explore the technologies, materials and strategies used by composites manufacturers working in the evolving space market.

Merging Materials and Technologies for Infrastructure and Construction
During this CW Tech Days event, sponsored by Composites One, experts will offer presentations to review and evaluate the composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in the Hydrogen Economy
In these sessions, experts will discuss the emerging hydrogen economy and the opportunities for composites in this lucrative space.
Collections See All

Composites in Hydrogen Storage
A report on the demand for hydrogen as an energy source and the role composites might play in the transport and storage of hydrogen.

Recycled Composites
This collection features detail the current state of the industry and recent success stories across aerospace, automotive and rail applications.

Thermoplastic Composites
This collection details the basics, challenges, and future of thermoplastic composites technology, with particular emphasis on their use for commercial aerospace primary structures.

Tooling
This collection features recent CW stories that detail a range of tooling technologies, processes and materials.

Home
Suppliers
Cybernet Systems Co., Ltd.

Cybernet Systems Co., Ltd.

FUJISOFT Bldg. 3 Kanda-neribeicho
Chiyoda-ku
Tokyo, 101-0022 JP
81 3 5297 3767
cmas@cybernet.co.jp
cybernet.co.jp/ansys/product/lineup/multiscale/en/?utm_source=cw_sourcebook&utm_medium=cw_sourcebook&utm_campaign=trade_magazines

About Cybernet Systems Co., Ltd.

Multiscale.Sim - Multiscale analysis add-in tool for Ansys® Workbench™ environment. Multiscale.Sim can perform a numerical material test on composites to evaluate macroscopic anisotropic material constants without having to carry out a physical material test.

IS THIS YOUR COMPANY?

UPDATE YOUR LISTING SUBMIT A PRESS RELEASE TO OUR EDITORIAL TEAMS

Cybernet Systems Co., Ltd. Supplies the Following Products