Trends
Airbus begins assembly of first Wing of Tomorrow prototype
The program brings together more than 100 new technologies and composites innovations, including delivery of the first fixed trailing edge by GKN Aerospace.
Read MoreVertical Aerospace partners with GKN Aerospace on wing structure for VA-X4 eVTOL
GKN will deliver wing structures and wiring systems for the composites-intensive, zero-emissions aircraft.
Read MoreSaudi Aramco inaugurates first GFRP rebar production facility
A joint venture between Pultron and IKK now has a dedicated facility, IKK Mateenbar, to manufacture and supply corrosion-free fiberglass rebar for infrastructure projects in Saudia Arabia, the Middle East and North Africa.
Read MoreVABO Composites' maritime fire doors pass 60-minute resistance test
FRD60 composite doors cover all B15 and B30 requirements and enhance VABO portfolio for the company’s commercial, superyacht and naval sector client base.
Read MoreElectroimpact, Toray, Janicki advance technologies for rapid, large-scale thermoplastic parts manufacture
Project combines Electroimpact high-speed AFP equipment, Janicki’s OOA heated layup tooling system and Toray Cetex TC1225 low melt PAEK UD tape for deposition rates of up to 4,000 inches/minute.
Read MoreHybrid 3D printing/machining center enables custom vehicle restoration project
3D-printed CF-filled molds made with new CMS Kreator system shorten production time, reduce costs for Bercella’s Restomod Maserati project.
Read MoreCAMX 2021 exhibit preview
The composites industry is gearing up for CAMX 2021 in Dallas, Texas, the first in-person major trade event in more than two years.
Read MoreMingYang Smart Energy launches MySE 16.0-242 offshore hybrid drive wind turbine
Reported to be the world’s largest offshore hybrid drive wind turbine with a 242-meter diameter rotor, 118-meter-long blades and 46,000-square-meter swept area, the MySE 16.0-242 enhances energy production, CO2 elimination and efficiency capabilities.
Read MoreST Bungalow to demonstrate fiberglass roofing solution from recycled wind blades
The New York-based startup recently partnered with a wind blade recycling company and plans to produce its first full-scale prototypes this year.
Read MoreHexagon Purus announces new manufacturing facility for composite battery packs, hydrogen fuel storage systems
The Hexagon Group spin-off has broken ground on the 60,000-square-foot micro-factory, based in Kelowna, Canada, which is scheduled for 2022 completion.
Read More