Design & Tooling
Altair named official supplier for Luna Rossa Prada Pirelli team
With the 36th America’s Cup yacht race approaching, Altair’s design platform has enabled a systematic and detailed approach to composite optimization for the racing team’s boat.
Watch
Braided preforms meet phase-change tooling
A program from the U.S. Air Force Research Laboratory adopts automated braiding and phase-change tooling for a complex geometry unmanned aircraft part.
Watch
Unmanned Loyal Wingman aircraft performs low-speed taxi test
Reaching maximum speeds of 16 mph on the ground, the low-speed taxi determined the Loyal Wingman’s runaway independence for its maiden flight later this year.
Read More
Thermwood demonstrates novel 3D printing approach for large vessel molds
Thermwood 3D-printed and trimmed five-foot-tall sections that were then bound together and bolted to form a complete female mold. The entire mold section, made of four printed pieces, weighs 4,012 pounds and required 65.5 hours to print.
Read More
Sojitz invests in IsoTruss composite telecommunication infrastructure
The lattice telecommunication structure is equipped with the structural capabilities for bending and torsion and is corrosion-resistant, an advantage to coastal areas.
Read More
Natural fiber crash box design for motorsport
The natural fiber Front Impact Absorbing Structure (FIAS) prototype showed desired crash behavior and eradication of sharp splintering, proving it as an alternative to carbon fiber in motorsport applications.
Watch
Next-generation composites qualification
Fully digital qualification hasn’t yet arrived, but simulation and analysis software continue to evolve and work together with physical testing practices.
Read More
Dalian University participates in AnalySwift Academic Partner Program
Dalian University of Technology uses Swiftcomp software to calculate the effective mechanical properties on morphing honeycomb and corrugated sandwich structures.
Read More
SpaceShip Two prepares for first spaceflight
Virgin Galactic prepares its vehicles, pilots, team and facilities with rigorous pre-flight checks and objectives before the flight which will be carried out later this fall.
Read More
Clean Sky project completes carbon fiber canopy structure for RACER demonstrator
Coordinated by Airbus Helicopter, the canopy structure was designed and manufactured to optimize low aerodynamic drag and meet bird strike requirements.
Read More
.jpg;maxWidth=300;quality=90;format=webp)
