Videos
Fingerprinting liquids for composites
Collo uses electromagnetic sensors and edge analytics to optimize resin degassing, mixing, infusion, polymerization and cure as well as monitoring drift from benchmarked process parameters and enabling in-situ process control.
Watch
Continuous Composite Systems (CCS) – enhanced strength and rigidity
With our Continuous Composite Systems (CCS) products and process, L&L Products can deliver a cost-effective, lightweight, ultra-high strength reinforcement solution that brings extensive engineering knowledge, advanced CAE modeling, and the ability for adhesive use in a variety of applications. (Sponsored)
Watch
James Webb Space Telescope reaches major milestone as primary mirror unfolds
Full deployment of the 21-foot, gold-coated primary mirror completes the final stage of all major spacecraft deployments in preparation for science operations.
Watch
The outlook for thermoplastic composites: CW Trending Episode 7
What are the experts saying about the state of thermoplastic composite materials today? CompositesWorld Editor-in-Chief Jeff Sloan dives into this topic and more with Solvay in our latest CW Trending episode.
Watch
Arris Composites announces Sustainable Consumer Products Program using Additive Molding technology
Oval bezel demonstrator for consumer electronics has sub-millimeter features, out-performs metal, is antenna transparent and more than 50% of the matrix comes from a renewable plant source.
Watch
NASA’s James Webb Space Telescope successfully launches to space
Innovative technologies and composite materials from RUAG Space and Toray Advanced Composites contribute to protection of the complex observatory at launch and during its six-month journey in space.
Watch
First hover flight takes Archer Aviation’s Maker aircraft to the skies
Six months after unveiling its composites-intensive Maker eVTOL aircraft, Archer has achieved both FAA airworthiness certification and its first successful hover flight, with a broadening flight testing campaign coming soon.
Watch
Addcomposites adds tape winding to Finland facility for pilot trials
The new capability, which enhances the available level of design freedom, was added to encourage manufacturers to develop new innovations using tape winding.
Watch
BMW rolls out multi-material Carbon Cage with 2022 iX vehicle line
For its new battery-electric iX sports activity vehicle, BMW combines CFRP strategies from previous i3, i8 and 7-Series designs and adds CFRTP for a lightweight, rigid frame.
Watch
SAMPE’s new CTO, Raj Manchanda: CW Trending Episode 6
SAMPE’s new chief technology officer, Raj Manchanda, talks to CW’s editor-in-chief Jeff Sloan about taking the technical reigns at the composites industry’s most technologically intense organization. Manchanda also talks about his path to SAMPE and the upcoming SAMPE Materials Innovation & Advanced Technology Leadership Forum, Jan. 26-27 in Huntington Beach, Calif., U.S.
Watch
Saertex presents SAERfoam structural core materials
Hybrid core material is simple to process, highly economical and exhibits a shear modulus up to four times greater in comparison to PVC and PET.
Watch
Hengshen to produce rear pressure bulkhead demonstrators
China-based Hengshen Carbon and Composites will produce five 4.5-meter demonstrator composite rear pressure bulkheads (RPB) for a Chinese aerospace OEM.
Watch
