Diehl Aviation, 9T Labs present Eco Bracket
Ultra-lightweight and made of recycled composites, the Eco Bracket cuts weight and cost in half and reduces CO2 emissions, in addition to providing high performance.
WatchDiehl Aviation sets up new aircraft interiors production in Mexico
The Querétaro site will start in mid-2025 with Airbus A220 overhead bins assembled in Québec, Canada and Alabama in the U.S.
WatchAura Aero ERA aircraft program issues tenders for fuselage design, airframe engineering
The 19-seat hybrid-electric aircraft was conceived to use composite and metal construction. Aura Aero has signed a PAC with EASA to finalize the framework for its CS-23 category certification.
Read MoreHexagon Agility CNG/RNG tanks integrated into Brudeli for ZEV trucks in North America
Brudeli’s patented plug-in Powerhybrid technology will use Hexagon Agility CNG/RNG fuel system with Type 4 tanks, enabling Class 7 and 8 trucks to meet ACT and ACF regulations.
WatchGlass fiber-reinforced Akulon RePurposed recyclate enables Ahrend sustainable office chair
Envalior 30% glass fiber-reinforced Akulon RePurposed material helps Ahrend achieve lighter task chair with closed-loop value chain and reduced emissions.
Read MoreHexagon Purus to supply hydrogen storage to Toyota Motors North America
Hydrogen storage and high-voltage battery system to support Class 8 heavy-duty fuel cell powertrains developed by Toyota.
Read MoreKVE Composites: New CEO, thermoset parts, thermoplastic future
Longtime parts manufacturer offers more than composites welding. CW’s conversation with CEO Kjelt van Rijswijk explains KVE’s vision with Daher and where it’s headed.
Read MoreFilament winding increases access to high-performance composite prostheses
Steptics industrializes production of CFRP prostheses, enabling hundreds of parts/day and 50% lower cost.
Read MoreAirbus video highlights RACER compound helicopter first flight
Launched as part of a Clean Sky 2 program, a compound design — rotor, split fixed-wing, propulsive propellers — uses composites to cut fuel consumption and emissions by 20%.
WatchNew CMC turbine vanes successfully tested in wind tunnel
SiC/SiC ceramic matrix composite (CMC) inlet guide vanes for a high-pressure turbine are aimed for a geared turbofan and show promise for more efficient aeroengines with less weight and need for cooling.
Read MoreCryomotive prepares CcH2 storage for demonstration on heavy-duty trucks
Cryogas system is based on carbon fiber towpreg wrapped Type 3 inner tank at 400 bar storing 38 kilograms of CcH2.
Read MoreHexagon Purus reports all-time high quarterly revenue, up 67% over Q1 2023
Type 4 CFRP cylinder manufacturer continues ramp-up, with H2 infrastructure up 38% and H2 mobility up 213% year over year while momentum continues in aerospace applications.
Read More