AOC Formulations Suppliers Showroom

AOC presents complete range of rPET-based resin formulations

Czech Republic facility takes post-consumer waste and converts it into high-quality formulations, such as the Synolite 4600 and 1112-G series, for composites manufacturing.

AOC introduces UV-Resistant Automotive System for SMC parts

AOC’s novel formulation, tested in the lab and in real-world environments, delivers a deep black, molded-in color that resists fading and offers high scratch resistance.

AOC Atlac 430E resin formulation reduces Versteden styrene emissions

Developed for composite piping systems development, the novel system has proven low levels of styrene concentration during hand lamination and filament winding processes.

Composites end markets: Batteries and fuel cells (2024)

As the number of battery and fuel cell electric vehicles (EVs) grows, so do the opportunities for composites in battery enclosures and components for fuel cells.

Composite underground storage tanks protect national recreation area

Composite underground storage tanks for a service station in Ecuador, aided by AOC’s material technologies, are playing a role in protecting the natural environment of Playas Villamil National Recreation Area.

High-performance fire-retardant resin series for composites

CAMX 2023: AOC’s Firepel R003 resin technology series are low viscosity, non-filled and non-halogenated polyester resins that meet the challenges of EV battery enclosures, mass transportation and architectural projects.

People in composites: May 2023

Take a look at this month’s new hires and promotions in the composites industry from Composite Integration, RAMPF Composite Solutions, Plyable and AOC.

Recycling end-of-life composite parts: New methods, markets

From infrastructure solutions to consumer products, Polish recycler Anmet and Netherlands-based researchers are developing new methods for repurposing wind turbine blades and other composite parts.

Materials & Processes: Resin matrices for composites

The matrix binds the fiber reinforcement, gives the composite component its shape and determines its surface quality. A composite matrix may be a polymer, ceramic, metal or carbon. Here’s a guide to selection.

Composites end markets: Industrial (2022)

Composites often must meet a certain aesthetic in applications where the consumer is the end user. But fiber-reinforced materials are just as valuable in industrial applications where corrosion resistance, high strength and durability are the performance key.

Hybrid battery cover: Materials, process decisions

A Q&A with Timo Huber, vice president of HRC’s Advanced Composite Technology Center, discusses material and process considerations for HRC Group’s SMC electric vehicle battery cover research project.

SMC material configurations tailored to automotive battery enclosure design

SMC battery cover offers various module configurations, levels of performance, mass and cost for electric vehicles.

Corrosion-resistant resins enable FRP petrochemical plant equipment

Spanish fabricator Ollearis used AOC resins and glass fiber filament winding to meet design and cost requirements for combustion unit tank and pipes.

Composites resin producer AOC acquired by Lone Star

AOC’s strength in the production and formulation of unsaturated polyester resins, vinyl ester resins and other solutions are expected to align with Lone Star’s specialty chemical and manufacturing businesses.

Resin shortages continue to affect composites supply chain

Power outages caused by mid-February’s U.S. winter storms led to immediate shortages from Gulf Coast petrochemical companies. Fabricators continue to report shortages.

AOC acquires Ashland Global Holdings' maleic anhydride business

The acquisition fortifies a critical ingredient in the production of unsaturated polyester resins, AOC’s primary business, and provides additional opportunities for AOC in the maleic anhydride market.

People in Composites: June 2020

Siemens Gamesa, Composites for Europe, SPE, Lockheed Martin and more announce management changes.

AOC resins support manufacture of emergency hospital wards

Rapidly built emergency hospital wards built in response to the coronavirus outbreak incorporate AOC resins in a pre-fabricated roofing system.

AOC Aliancys announces changes to European distribution

Effective this month, BÜFA Composite Systems, Gaches Chimie Spécialités and Nor-Komp are exclusive distributors of AOC polyester and vinyl ester products.

Microfiber-infused resin enables single-step molding process

Spoke Materials’ reinforced liquid composites provide alternative fabrication methods.

AOC Aliancys announces new company name

Beginning March 2, the global resins and gelcoats supplier will operate under the name AOC.

Decommissioned wind turbine blades used for cement co-processing

An initiative to recycle wind turbine blades includes the use of recycled glass fiber composites for cement manufacturing, replacing raw material and saving energy.

People in Composites: April 2019

CW’s monthly roundup of people news in the composites industry.

Composites restore drinking water in historic Amsterdam

A fiberglass-reinforced liner helped resurrect a corroded waterline pipe.

AOC and Aliancys join forces

The two companies have merged to form a new global supplier of polyester and vinyl ester resins, gel coats and materials for the composites industry.

U.S. styrene-reduction mandates: Go or no-go?

Legislative changes are slow in coming, but technology forges ahead.

AOC to be acquired by CVC Capital Partners

AOC, global producer of resin chemistries for composites, has signed a definitive agreement with CVC Capital Partners to be acquired.

Highlights: SPE ACCE 2017

The Society of Plastics Engineers Automotive Composites Conference and Exhibiton (SPE ACCE), held Sept. 6-8 in Novi, MI, US, remains the composites industry’s go-to event for the latest on technology and equipment for automotive composites design, tooling and fabrication.

SMC: Old dog, more tricks

In the sheet molding compound renaissance, the advent of new resins and compounds are broadening the definition and application of this versatile family of composites.

SMC: Old dog, new tricks

A sheet molding compound renaissance highlights new reinforcements, new fillers, new matrices, new opportunities.

SMC 4.0

The story behind the supplier-orchestrated effort that eliminated unacceptable defects levels in painted Class A SMC exterior auto parts.

UV-curing grows composites market share

Established and flourishing in the underground pipe relining arena, UV-curable resins are finding new applications in other out-of-the-way places.

Composites enable portability in driving simulator

FRP design enables portable, light-tight, enclosure with an image-projection-grade inner surface.

Composite tanks best stainless steel over road, rail and sea

One-piece, filament wound containers cost less, hold more, last longer.

Materials & Processes: Fiber formats for composites

Fibers used to reinforce composites are supplied directly by fiber manufacturers and indirectly by converters in a number of different forms, which vary depending on the application. Here's a guide to what's available.

Low-density SMC: Better living through chemistry

Proprietary sizing, special glass roving and microspheres strip 9 kilos of weight from Corvette body panels.

Green resins: Closer to maturity

As more players approach the market, R&D expands, but overall market growth in the composites arena is still slow but steady.

Bioresins: Not a tsunami, but more like a rising tide

This excerpt from an upcoming article in CW magazine shows that a lot of investigation is happening, and some promising applications are developing.

Composites lighten driving simulator dome

A first for its codevelopers, Pagnotta Engineering Inc. (PEI, Exton, PA, US) and JRL Ventures (Cape Coral, FL, US), this low-mass enclosure spawned a new product venture for the pair in research-oriented driving simulation systems.

SPE ACCE report

Automotive composites still on the horizon — are they getting closer?

SPE ACCE 2014 report

Automotive composites still on the horizon — are they getting closer?

Styrene & cobalt: Headed for the exit?

Fair or not, styrene and cobalt are now considered harmful to humans. Here's an update on the impact this issue poses for the composites industry and what resin and additive manufacturers are doing about it.

Bus station pavilion: A marriage of design and manufacture

Architectural design studio and boatbuilder cooperate to make this passenger terminal "first" a first-class showpiece.

Sewer system: Corrosion protection for buried odor-control ductwork

ECS Environmental Solutions (Belton, Texas) was contracted to provide odor control equipment and relied on Vipel vinyl ester resin from AOC Resins (Collierville, Tenn.) for more than 1,000 ft/305m of fiberglass ductwork and accessories.

Cast polymer market: On the upswing

Postrecession, this commodity industry is emerging stronger and going global as competitive pressures encourage innovation.

ACMA COMPOSITES 2013 review

Once again, cautious optimism, an abundance of revealing research and a parade of notable new products are ACMA convention keystones.

Cured in place pipe: Trenchless trends

A variety of CIPP products are enabling the rehabilitation, rather than excavation and replacement, of underground pipe for wastewater and drinking water.

ACMA COMPOSITES 2013 preview

For 2013, the American Composites Manufacturers Assn. (ACMA, Arlington, Va.) returns its annual U.S. COMPOSITES exhibition and convention to the East Coast’s sunny, fun capital, Orlando, Fla.

Industrial corrosion control: Huge opportunities

Fiber-reinforced plastic is the ideal but still widely ignored option in environments that eat away at most metal alloys. Opportunities abound, but the key is still education.

Cured-in-place pipe: UV curing ensures liner performance in leaking pipe

When the Knoxville, Tenn. Utilities Board faced a needed repair of an actively leaking clay sewer pipe, it opted for Reline America's (Saltville, Va.) cured-in-place pipe cured with ultraviolet (UV) light.

Corrosion prevention: Glass/vinyl ester liner protects power plant pit

When PT Paiton Energy in Paiton, East Java, Indonesia, wanted to expand its existing 1,230-MW coal-fired power plant, it needed a new concrete aeration pit to hold seawater that is circulated through the plant’s cooling system.

Green resins: Growing up

High hurdles remain, but the push for sustainable sources of resin monomers is gaining momentum.

Cured-in-place pipe project tests composites capabilities

Insituform Technologies uses iPlus Composite cured-in-place pipe technology to replace a sewer pipeline 25 ft underground at San Diego International Airport.

Tough resins for aggressive environments

New thermoset systems drive composites deeper into markets where fire, corrosion, stress and fatigue are ever-present threats.

Heavy-duty infusion: Scaling up for scrubbers

Infused 3-D woven fabric preforms best steel in beams and unitized deck structures built for the caustic confines of massive flue gas desulfurization systems.

Corrosion resistance: Desert-bound chemical and potable-water tanks

RL Industries (Fairfield, Ohio) recently overcame logistical obstacles to successfully fabricate five large composite storage tanks for a chemical plant in Saudi Arabia.

Composites 2010 Product Showcase

The ACMA’s Las Vegas exhibition reflected an industry in recovery.

Report from Detroit: NAIAS highlights

Electrics and hybrids make headlines, composites suppliers see hopeful signs after OEM restructuring.

SPE's ACCE 2009 Show Preview

The Society’s 2009 Automotive Composites Conference & Exhibition charts an industry at a crossroads.

Researchers nano-enhance natural fiber

Mississippi State University uses nanoparticle impregnation to improve the performance of kenaf fiber in composites.

COMPOSITES+POLYCON 2009 Showcase

Despite the deepening recession, composites pros returned to the show in its new time slot to explore the wealth of products and services collected here.

Resin systems update: The greening of thermosets

Thermoset resin formulators seek environmental benefits as customers demand reduced cost and increased performance.

One-piece molded truck body uses customized resin formulation

When General Motors Corp. (Flint, Mich. ) opted to update its small Astro cargo van in 2007 concurrent with the introduction of new Colorado and Canyon light truck platforms, customers talked and GM listened.

NAIA 2009 show highlights

The Detroit auto exhibition’s hybrid and electric vehicle introductions underscore the need for lightweighting with low investment cost, which composites can provide.

Composites ride and support the rails

Increased ridership and heavier axle loads on rail systems around the world signal a potential boon for composites.

Competitive to the core

This new superyacht combines luxury innovations with energy-efficient construction, enabled by a new marine-grade balsa core.

FRP forms enable fluted concrete column design

The Century Project, a 42-story luxury condominium tower in Los Angeles, Calif. , designed by Robert A. M.

Composites Pick Up New Applications in Light Trucks

Long a bastion of steel, the tougher-duty pickup segment of the light truck market is warming to the benefits of composites.

Taking Subjectivity out of Class A Surface Evaluation

Toward the goal of more consistent, repeatable and quantifiable Class A surface analysis, automakers and systems suppliers are developing and employing automated surface inspection tools.

Cast polymer concrete structures save city's sewers

Beneath its historic colonial charm, Charleston, S.C. had an underground sewer system in need of repair. Engineers at U.S. Composite Pipe (Alvarado, Texas) devised a solution that included unique cast polymer composite sewer interceptor structures — 10-ft/3m-diameter vertical access shafts that extend as far as 110

NAIA Show Highlights

The 2007 Detroit Auto Show emphasizes Â“greenÂ” themes and high performance.

Hybrid bridge design employs composite beams

The Texas Dept. of Transportation (TxDOT) recently installed over a drainage ditch in Refugio County a new bridge that incorporates composite beams, replacing a single-span, steel girder bridge. Located 35 miles from Corpus Christi, the 50-ft/15.4m long, 32-ft/10m wide bridge is the state’s second to use

Composites Polycon 2007 Showcase

Tampa show attendance is up despite slow economy. ACMA reschedules 2008 show.

Carbon fiber buys its way onboard

First used in one-off yacht and powerboat designs, where cost is no obstacle in the search for a performance edge in local regattas or around-the-world races, carbon fiber has since carved a niche in categories that were once the exclusive reserve of glass-reinforced composites, metals or wood. In applications as

Composites Technology Digs-In Underground

The Underground Construction Technology Conference welcomes corrosion-resistant composites for underground infrastructure.

FRP Two way Joist System The Answer For Cleanroom Concrete Flooring

When electronics giant Texas Instruments Inc. (TI, Dallas, Texas) spec'd the 200,000 ft2 (18,850m2) multistory cleanroom for its new semiconductor manufacturing facility, it needed to accommodate not only strict indoor air quality requirements but heavy structural loads as well. The cleanroom was designated as the

AOC Formulations

Americas

CONNECT

About AOC Formulations

IS THIS YOUR COMPANY?

As Seen On CompositesWorld

AOC Formulations Supplies the Following Products

Trade Names Offered by AOC Formulations

Editorial, News, and Products